VIAIR
VIAIR 84P portable air compressor kit for 31-inch tyres
- Air Compressors
$62.99
0.00075925BTC
In stock
Banner
Banner QS30R 60 m receiver 10-30 V dc IP67 NEMA 6 2 m cable
Infrared opposed-mode receiver detects targets up to 60 m with bipolar NPN and PNP outputs on a 2 m cable
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 60 m sensing range covers large industrial areas
- 10-30 V dc supply fits standard control voltage
- IP67 and NEMA 6 ratings resist dust and water ingress
- Bipolar NPN and PNP outputs simplify wiring to any PLC
- 2 m pre-wired cable reduces installation time
Long-range receiver for opposed-mode sensing
The Banner QS30R is a rectangular receiver built for opposed-mode photoelectric sensing at distances up to 60 m. It operates on a 10-30 V dc supply and provides both NPN and PNP discrete outputs from a single 2 m cable. The thermoplastic housing carries an IP67 and NEMA 6 rating for wet or dusty industrial environments.
Cable connection limits installation flexibility
A fixed 2 m (6.5 ft) cable is the only connection method; no quick-disconnect option is available. This means the cable must be routed to the termination point and cannot be swapped for a different length or connector style without cutting and re-terminating. Power-up delay is 100 ms and output response time is 5 ms.
30 mm barrel diameter fixes mounting pattern
The sensor mounts via an M30 thread on a 30 mm barrel diameter, so the mounting hole and bracket spacing are determined by that single dimension. Operating temperature spans -20 °C to 70 °C with up to 95 % relative humidity at 50 °C. Acrylic lens material and bipolar outputs complete the specification.
Highlights
- 60 m sensing range covers large industrial areas
- 10-30 V dc supply fits standard control voltage
- IP67 and NEMA 6 ratings resist dust and water ingress
- Bipolar NPN and PNP outputs simplify wiring to any PLC
- 2 m pre-wired cable reduces installation time
Specifications
| Brand | BANNER |
|---|---|
| Model | QS30R |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Should I choose the 60 m receiver with 2 m cable or look for a different sensing range?
This model is a 60 m opposed-mode receiver with a fixed 2 m cable; select it when the application requires that exact range and cable length.
What does the 60 m range mean once the sensor is mounted on a machine?
It indicates the maximum sensing distance between this receiver and its matched emitter under ideal alignment; real-world distance can be lower due to contamination or misalignment.
How does the 10-30 V dc supply and bipolar NPN/PNP output affect wiring?
The sensor operates on any 10-30 V dc source and provides both NPN and PNP discrete outputs, allowing direct connection to either sinking or sourcing PLC inputs without extra modules.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
