Banner
Banner QS18VP6FF125 Photoelectric Sensor 125 mm 10-30 V dc PNP 2 m Cable
Fixed-field background-suppression photoelectric sensor detects objects up to 125 mm with a visible red LED, 10-30 V dc PNP output and a 2 m cable in an IP67-rated ABS housing
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Detects objects up to 125 mm with fixed background suppression
- Visible red LED beam at 632 nm wavelength for clear alignment
- Operates on 10-30 V dc supply with PNP complementary output
- IP67 and NEMA 6 rated ABS housing withstands harsh environments
- 2 m cable connection with 0.85 ms response time for fast switching
All-Purpose Photoelectric Sensor
The Banner QS18VP6FF125 is a fixed-field background suppression sensor designed for reliable object detection in industrial environments. It operates on a 10-30 V dc supply and provides complementary solid-state PNP outputs. A visible red LED at 632 nm produces a small spot for precise alignment. The sensor is supplied with a 2 m cable and mounts via an M18 barrel.
Thermals Noise and Power Draw
The unit functions across a temperature range of -20 °C to 70 °C with up to 95 % relative humidity at 50 °C. An ABS housing rated IP67 and NEMA 6 resists dust and water ingress during normal operation. Acrylic lens material maintains optical clarity in typical factory conditions. The solid-state output has no moving parts to generate acoustic noise.
125 mm Sensing Range
The fixed sensing distance of 125 mm determines whether this sensor fits the application; objects beyond this point will not be detected. Background suppression ignores surfaces behind the target up to the defined limit. A response time of 0.85 ms and repeatability of 160 µs support consistent performance on fast lines. No remote teach or timing adjustments are available on this model.
Highlights
- Detects objects up to 125 mm with fixed background suppression
- Visible red LED beam at 632 nm wavelength for clear alignment
- Operates on 10-30 V dc supply with PNP complementary output
- IP67 and NEMA 6 rated ABS housing withstands harsh environments
- 2 m cable connection with 0.85 ms response time for fast switching
Specifications
| Brand | BANNER |
|---|---|
| Model | QS18VP6FF125 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I mount the 18 mm barrel and run the 2 m cable to a 10-30 V dc supply?
Thread the M18 housing into a prepared hole, secure with the supplied lock nuts, then connect the four-wire cable — brown to 10-30 V dc, blue to 0 V, black for PNP load, white for complementary output — keeping the cable bend radius gentle to avoid strain.
What part of the QS18VP6FF125 will need replacement first in a dusty, wet environment?
The acrylic lens and ABS housing are sealed to IP67 and NEMA 6, so the only serviceable item is the fixed 2 m cable; if the jacket is cut or abraded, the entire sensor must be replaced because there is no quick-disconnect option.
At what ambient temperature does the 125 mm background-suppression range start to drift?
The sensor is rated from -20 °C to 70 °C; within that window the 125 mm cut-off remains stable, but sustained operation above 70 °C will cause the visible red 632 nm LED output to degrade and the fixed-field distance to shift.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
