Banner
Banner QS18VP6AF100Q5 photoelectric sensor 10-30V dc PNP 100mm IP67
Adjustable background-suppression sensor detects objects up to 100 mm with 10-30 V dc PNP output and IP67 housing
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Adjustable 20-100 mm cutoff tailors detection to the application
- 10-30 V dc supply suits standard industrial power rails
- Complementary PNP output simplifies wiring to PLC inputs
- IP67 and NEMA 6 ratings withstand wash-down and dust
- 7 ms response time catches fast-moving targets reliably
All-purpose photoelectric sensor for 10-30V systems
The Banner QS18VP6AF100Q5 is a rectangular background-suppression proximity sensor with a 1-100 mm adjustable field and a 20-100 mm adjustable cutoff. It operates on 10-30 V dc and provides complementary PNP outputs through a 6-inch pigtail with an M12 Euro-style quick-disconnect. The visible red LED beam runs at 640 nm and the ABS housing carries NEMA 6 and IP67 ratings.
Check supply voltage and mounting before ordering
Verify that your control system supplies 10-30 V dc and can accept PNP discrete signals with a 0.7 ms response time. The sensor uses a 4-pin M12 connector on a short pigtail, so confirm cable routing and connector compatibility. Mechanical screw adjustment sets the sensing distance, and the 200 ms power-up delay must fit your start-up sequence. Operating temperature tops out at 55 °C with 95 % relative humidity at 50 °C.
Replaces fixed-field or through-beam sensors
The adjustable background suppression lets one model cover jobs that previously needed multiple fixed-range units, reducing inventory when 1-100 mm detection is required. The jump is worth it when ambient light or reflective backgrounds cause false trips on simpler diffuse sensors, or when a visible red alignment spot speeds setup. It does not suit applications needing remote teach, intrinsic safety or specialised water-detection modes.
Highlights
- Adjustable 20-100 mm cutoff tailors detection to the application
- 10-30 V dc supply suits standard industrial power rails
- Complementary PNP output simplifies wiring to PLC inputs
- IP67 and NEMA 6 ratings withstand wash-down and dust
- 7 ms response time catches fast-moving targets reliably
Specifications
| Brand | BANNER |
|---|---|
| Model | QS18VP6AF100Q5 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What comes in the box and do I need a separate mounting bracket?
The sensor ships as a single unit in a box with a 6-inch pigtail and M12 Euro connector. Mounting hardware is not included and must be sourced separately.
Should I choose the 100 mm adjustable cutoff or a fixed-range version for detecting small parts at 50 mm?
This model offers an adjustable cutoff from 20 to 100 mm, so you can tune it precisely for 50 mm detection without needing a fixed-range alternative.
How does the 0.7 ms response time affect detection on a fast conveyor?
The 0.7 ms output response time allows reliable detection of objects moving at high speed, with 175 µs repeatability for consistent positioning.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
