Banner
Banner QS18VP6AF100 photoelectric sensor 1-100mm PNP 2m cable
Adjustable background-suppression sensor detects objects from 1 to 100 mm with complementary PNP output on a 2 m cable
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Detects objects from 1 to 100 mm with adjustable background suppression
- Complementary PNP output works with 10-30 V dc control systems
- 2 m cable eliminates the need for a separate connector
- IP67 and NEMA 6 ratings protect against dust and temporary immersion
- Visible red LED at 640 nm simplifies alignment and setup
Adjustable-field photoelectric sensor
The Banner QS18VP6AF100 is a rectangular proximity sensor with adjustable background suppression. It detects objects from 1 to 100 mm with a visible red LED beam at 640 nm. The unit operates on 10-30 V dc and provides complementary PNP outputs through a 2 m cable. An IP67 and NEMA 6 rating suits wash-down and outdoor environments.
Suited for short-range presence detection
Engineers who need reliable detection of small parts on conveyors or packaging lines will benefit from the adjustable cutoff between 20 and 100 mm. The mechanical screw adjustment allows precise field setting without a separate teach device. Buyers who require IO-Link diagnostics, remote teach capability or a quick-disconnect fitting should look at other models.
0.7 ms response time
The sensor switches in 0.7 ms with 175 µs repeatability, making it suitable for high-speed counting or sorting tasks. A 200 ms power-up delay means the output is stable shortly after supply voltage is applied. Verify that your controller can accommodate this timing before installation.
Highlights
- Detects objects from 1 to 100 mm with adjustable background suppression
- Complementary PNP output works with 10-30 V dc control systems
- 2 m cable eliminates the need for a separate connector
- IP67 and NEMA 6 ratings protect against dust and temporary immersion
- Visible red LED at 640 nm simplifies alignment and setup
Specifications
| Brand | BANNER |
|---|---|
| Model | QS18VP6AF100 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I set the 20-100mm cutoff distance on this QS18VP6AF100 sensor?
Turn the mechanical screw adjustment on the housing while the target is at the desired cutoff point; the red LED indicator shows when the 1-100mm range is correctly set for background suppression.
Which parts of this Banner sensor need replacement after extended use?
The acrylic lens should be cleaned regularly; the ABS housing and 2m cable are rated IP67 and NEMA 6 so no scheduled replacement is required within the 3-year parts coverage.
At what ambient temperature does the QS18VP6AF100 reach its operating limit first?
The maximum operating temperature is 55°C; above this the 10-30V dc supply and 0.7ms response time cannot be guaranteed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
