We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Banjo V150 1-1/2 inch FNPT polypropylene ball valve trap, grey fiberglass-reinforced body with yellow handle

Banjo

Banjo V150 1-1/2" FNPT Polypropylene Ball Valve Trap

SKU CH-YBME-ZFG1H MPN V150

Polypropylene ball valve with FKM seals and fiberglass reinforcement handles 225 PSI

  • TypeDrain Components
  • Diamond-turned ball ensures precise sealing with FKM seats
  • Fiberglass-reinforced polypropylene body resists corrosion at 225 PSI max
  • PTFE self-lubricating bushings prevent sticking for smooth operation
  • Self-aligning ball moves freely against seats for easy handle actuation
  • Stainless steel bolts provide durable assembly for inline plumbing

Application fit

The Banjo V150 is a 1-1/2" FNPT polypropylene ball valve trap designed for inline plumbing installations where chemical resistance and reliable shut-off are required. It suits installers needing a corrosion-resistant valve with a full-port design for unrestricted flow. It is not intended for applications requiring metal-body construction or higher pressure ratings beyond the stated limit.

Thermals noise power

The precision-molded polypropylene body reinforced with fiberglass handles the rated 225 PSI maximum without deformation under normal operating pressures. PTFE self-lubricating stem bushings and seats eliminate binding, so the handle moves with minimal force and no audible squeak. FKM seals maintain integrity across typical temperature ranges found in plumbing systems.

Build and connections

Stainless steel bolts secure the assembly for long-term durability, while the diamond-turned ball ensures spherically perfect contact with PTFE seats for leak-free sealing. The 1-1/2" FNPT threads allow direct connection to standard female pipe fittings without adapters. The full-port bore matches the pipe inner diameter, preventing flow restriction or debris buildup at the valve.

Highlights

  • Diamond-turned ball ensures precise sealing with FKM seats
  • Fiberglass-reinforced polypropylene body resists corrosion at 225 PSI max
  • PTFE self-lubricating bushings prevent sticking for smooth operation
  • Self-aligning ball moves freely against seats for easy handle actuation
  • Stainless steel bolts provide durable assembly for inline plumbing

Specifications

TypeDrain Components
BrandBanjo
ModelV150

Questions about this item

How do I install the 1-1/2" FNPT polypropylene ball valve trap and what common mistake should I avoid?

Thread the valve onto 1-1/2" FNPT connections using PTFE tape on male threads; do not over-tighten as the fiberglass-reinforced polypropylene body can crack under excessive torque.

What maintenance will the V150 ball valve trap require over time?

The PTFE self-lubricating stem bushings and seats are designed not to stick or bind; periodically cycle the handle to verify smooth operation and inspect FKM seals for chemical degradation.

What pressure limit will I reach first during sustained use of this 225 PSI rated valve?

The maximum working pressure is 225 PSI; sustained operation near this limit may accelerate wear on the diamond-turned ball and PTFE seats before the fiberglass-reinforced body shows stress.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.