We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White polypropylene three-way ball valve with lever handle and three FNPT ports

Banjo

Banjo V100SL 1" FNPT Polypropylene 3-Way Ball Valve Trap

SKU CH-B83G-H5ZFB MPN V100SL

Three-way polypropylene ball valve with 1 inch FNPT ports, full-port flow, PTFE seats and a 100 psi pressure rating

  • TypeDrain Components
  • Full-port flow with 100 psi pressure rating
  • Three FNPT ports simplify multi-direction piping
  • Polypropylene body resists corrosion across -20 to 150 °F
  • PTFE seats ensure tight shut-off without leakage
  • Lever handle allows quick manual operation

Polypropylene 3-Way Ball Valve

The Banjo V100SL is a 1-inch FNPT polypropylene ball valve with a three-way inline single-union body. It provides full-port flow control for plumbing and fluid-handling systems. The lever handle allows quick manual diversion or shut-off of compatible media.

Upgrade from two-way or reduced-port valves

This valve replaces two-way ball valves when flow diversion between three ports is required. The jump is worth it when a single union connection simplifies maintenance and full-port capacity prevents flow restriction in 100 psi CWP systems.

Verify connection type and temperature limits

Confirm that your piping uses 1-inch FNPT threads and that operating temperatures stay between -20 and 150 degrees F. Check that the media is compatible with polypropylene, PTFE seats and EPDM body seals before installation.

Highlights

  • Full-port flow with 100 psi pressure rating
  • Three FNPT ports simplify multi-direction piping
  • Polypropylene body resists corrosion across -20 to 150 °F
  • PTFE seats ensure tight shut-off without leakage
  • Lever handle allows quick manual operation

Specifications

TypeDrain Components
BrandBanjo
ModelV100SL

Questions about this item

What thread size and type does each port use?

All three ports are 1-inch female NPT threads, so male NPT fittings or adapters are required for connection.

How is the single-union body assembled and what step is often missed?

The union nut joins the body to the end connector; the EPDM body seal must be seated squarely before tightening, otherwise the joint will leak.

Which seals will need replacement after repeated pressure and temperature cycles?

The PTFE ball seats and the EPDM body seal are the wear items; both should be inspected when the valve is cycled between -20 and 150 degrees F at up to 100 psi.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.