We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black glass-reinforced bulkhead tank fitting with double female NPT threads and EPDM gasket

Banjo

Banjo TF050 1/2in FNPT Bulkhead Tank Fitting Trap

SKU CH-ETX7-SGXTE MPN TF050

A 1/2-inch female NPT bulkhead tank fitting with an EPDM gasket rated to 300 psi

  • TypeDrain Components
  • ColorBlack
  • EPDM gasket resists chemicals and temperature swings
  • Double-sided 1/2 in FNPT threads speed tank connections
  • Glass-reinforced poly body handles 300 psi service pressure
  • Bulkhead design mounts flush through tank walls
  • Black finish suits industrial and agricultural plumbing systems

Half-Inch Bulkhead Fitting

The Banjo TF050 is a glass-reinforced polypropylene bulkhead tank fitting with double-sided 1/2-inch female NPT threads. It provides a reliable pass-through connection for fluid-handling systems in agricultural, industrial and marine environments.

Simple Threaded Installation

The fitting installs by threading into a tank wall and tightening against the included EPDM gasket to form a seal. Over-tightening the plastic body can crack the reinforcement, and debris on the gasket surface often causes slow weeping that is mistaken for a defective part.

Rated For 300 PSI Service

The assembly handles continuous pressure up to 300 psi in water, fertiliser and compatible chemical lines. It is not suited for compressed-air systems or aggressive solvents that attack polypropylene, and the 1/2-inch port limits flow in high-volume transfer applications.

Highlights

  • EPDM gasket resists chemicals and temperature swings
  • Double-sided 1/2 in FNPT threads speed tank connections
  • Glass-reinforced poly body handles 300 psi service pressure
  • Bulkhead design mounts flush through tank walls
  • Black finish suits industrial and agricultural plumbing systems

Specifications

TypeDrain Components
ColorBlack
BrandBanjo
ModelTF050

Questions about this item

How do I confirm the bulkhead fitting is sealing correctly after installation?

Pressurize the system up to 300 psi and check for leaks at both female NPT connections and the EPDM gasket; no weeping means the fitting is working as intended.

What comes in the box and what must I supply separately?

The fitting includes the glass-reinforced poly body and EPDM gasket; you must supply 1/2in male NPT pipe nipples or adapters, thread sealant, and any mounting hardware for the tank wall.

Which version of the TF050 should I choose for a standard 1/2in tank drain?

The TF050 is a single 1/2in FNPT x 1/2in FNPT configuration; select it when you need double-sided female threads on a bulkhead fitting rated to 300 psi.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.