Banjo
Banjo SUV150FP 1-1/2" FNPT Polypropylene Ball Valve Single Union trap
A 1-1/2 inch FNPT polypropylene ball valve with single union design and full port for water systems rated to 300 psi
- TypeDrain Components
- Full-port design maximises flow capacity
- Polypropylene body resists chemical corrosion
- 300 psi rating handles high-pressure systems
- Three-piece construction simplifies maintenance access
- Manual two-way operation gives direct control
1-1/2" FNPT Polypropylene Ball Valve
This manual two-way ball valve uses a polypropylene body and ball for water service. It features a straight three-piece construction with a full-port design. The valve connects via 1-1/2 inch FNPT threads and carries a 300 psi maximum operating pressure. The handle is non-locking.
Installers needing chemical-resistant water shut-off
Suited for plumbing systems where polypropylene compatibility and full flow are required. The three-piece body allows in-line maintenance without removing the valve from the pipe. Not intended for steam, combustible gas or vacuum applications. Buyers needing 3-A sanitary certification or a locking handle should look at other models.
300 psi maximum operating pressure
This pressure rating defines the safe working limit for water at ambient temperature. Exceeding 300 psi risks valve failure and system damage. The rating applies only to the stated media and temperature range. Verify your system pressure before installation.
Highlights
- Full-port design maximises flow capacity
- Polypropylene body resists chemical corrosion
- 300 psi rating handles high-pressure systems
- Three-piece construction simplifies maintenance access
- Manual two-way operation gives direct control
Specifications
| Type | Drain Components |
|---|---|
| Brand | Banjo |
| Model | SUV150FP |
Questions about this item
Should I choose the 1-1/2" FNPT full-port version for my plumbing system?
The 1-1/2" FNPT full-port design matches standard pipe threads and gives unrestricted flow, so select it when your piping uses that size and you need maximum throughput.
How does the 300 psi operating pressure hold up once the valve is installed in a real water line?
The 300 psi rating is the maximum operating pressure for water service; normal residential or light-commercial lines run well below that, so the valve will handle typical pressure spikes without issue.
What does the FNPT thread standard mean for sealing and compatibility in practice?
FNPT indicates female National Pipe Taper threads, which seal with thread sealant or tape on matching male NPT fittings, providing a reliable, leak-resistant joint for water applications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



