We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polypropylene reducing nipple 3" to 2" MNPT Schedule 80

Banjo

Banjo RN300-200 Reducing Nipple 3" x 2" MNPT Sch 80

SKU CH-0PYB-EYBZK MPN RN300-200

Schedule 80 polypropylene reducing nipple connects 3" and 2" male NPT threads at 300 psi

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Schedule 80 polypropylene handles 300 psi operating pressure
  • Male NPT threads connect 3 in to 2 in pipe sizes
  • Black HAWA material resists corrosion in harsh environments
  • Rated from -20 to 150 degrees F for wide temperature range
  • 3-7/16 in overall length fits tight installation spaces

Application fit

The Banjo RN300-200 reducing nipple connects a three-inch male NPT thread to a two-inch male NPT thread in Schedule 80 polypropylene piping systems. It suits installers who need a straight, rigid transition between those two nominal sizes in chemical-transfer or industrial-drain layouts.

Sustained-load behaviour

Moulded from HAWA polypropylene, the fitting holds a 300 psi maximum operating pressure across a continuous temperature span of minus 20 to 150 degrees Fahrenheit. The Schedule 80 wall thickness resists creep and stress cracking during long-term pressurised service without deformation.

Upgrade path

This nipple replaces a field-fabricated reducer assembly or a lower-schedule fitting when the system demands full Schedule 80 pressure rating and the chemical resistance of HAWA polypropylene. The jump is justified whenever code or spec requires the higher pressure class and the broader temperature envelope.

Highlights

  • Schedule 80 polypropylene handles 300 psi operating pressure
  • Male NPT threads connect 3 in to 2 in pipe sizes
  • Black HAWA material resists corrosion in harsh environments
  • Rated from -20 to 150 degrees F for wide temperature range
  • 3-7/16 in overall length fits tight installation spaces

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandBanjo
ModelRN300-200

Questions about this item

Does the 300 psi rating hold when the system runs continuously at the 150 °F limit?

The polypropylene body is rated for 300 psi maximum operating pressure across the full -20 °F to 150 °F range.

Which thread sealant works with the 3 in and 2 in MNPT ends?

Use a PTFE tape or paste approved for polypropylene and NPT threads on both the 3 in and 2 in male ends.

Will the 3 7/16 in overall length fit between my existing Schedule 80 fittings?

The nipple measures 3 7/16 in end-to-end, so measure the gap between your current Schedule 80 components to confirm clearance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.