We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polypropylene Schedule 80 pipe plug with male NPT threads

Banjo

Banjo PLUG125 Plug, Polypropylene, 1-1/4", Schedule 80, 300 psi

SKU CH-VY5F-KAWB6 MPN PLUG125

Polypropylene drain plug with Schedule 80 rating handles 300 psi at temperatures from -20 to 150 degrees Fahrenheit

  • TypeDrain Components
  • ColorBlack
  • Polypropylene resists corrosion for long service life
  • Schedule 80 rating handles 300 psi maximum pressure
  • Male NPT threads seal with pre-applied thread sealant
  • Operates from -20 to 150 degrees Fahrenheit
  • Black finish identifies the fitting in plumbing systems

Fitting Specifications

This Banjo PLUG125 is a Schedule 80 polypropylene pipe plug rated for 300 psi maximum pressure. It suits plumbing and fluid-handling systems requiring a 1-1/4 inch nominal pipe size connection. The black fitting operates reliably from 20 degrees to 150 degrees Fahrenheit.

Threaded Construction

Male NPT threads allow direct installation into compatible Schedule 80 female fittings without additional adapters. The 2-1/4 inch outside diameter and 1-3/8 inch overall length provide a compact seal. Pre-applied thread sealant is not included, so appropriate sealant must be supplied during assembly.

System Compatibility

Verify that the piping network uses Schedule 80 dimensions and a 1-1/4 inch nominal size before ordering. Confirm the media temperature stays within the 20 to 150 degree Fahrenheit range. Ensure the operating pressure does not exceed the 300 psi rating for safe service.

Highlights

  • Polypropylene resists corrosion for long service life
  • Schedule 80 rating handles 300 psi maximum pressure
  • Male NPT threads seal with pre-applied thread sealant
  • Operates from -20 to 150 degrees Fahrenheit
  • Black finish identifies the fitting in plumbing systems

Specifications

TypeDrain Components
ColorBlack
BrandBanjo
ModelPLUG125

Questions about this item

What is the maximum pressure the 1-1/4 inch Schedule 80 polypropylene plug is rated for?

The plug is rated for a maximum working pressure of 300 psi at ambient temperature, suitable for Schedule 80 piping systems.

What are the outside diameter and overall length dimensions needed to confirm this plug fits the port?

The plug has a 2 1/4 inch outside diameter and a 1 3/8 inch overall length for a 1-1/4 inch NPT port.

How do I install the male NPT plug correctly, and what common step should I avoid?

Thread the plug into the female NPT port by hand, then tighten one to two turns with a wrench; do not apply additional thread sealant as it is pre-applied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.