We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polypropylene hex nipple, 2 inch MNPT both ends, Schedule 80, 300 psi

Banjo

Banjo NIP200-SH Hex Nipple Trap 2 in MNPT Schedule 80 300 psi

SKU CH-35BC-PKAMS MPN NIP200-SH

Connects two 2 in MNPT Schedule 80 pipes with a 300 psi rated polypropylene hex nipple

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Rated for 300 psi maximum operating pressure
  • Schedule 80 wall thickness for heavy-duty service
  • Polypropylene construction resists corrosion and chemicals
  • Operates from -20 to 150 degrees Fahrenheit
  • 2 in MNPT threads on both ends

Product Type and Purpose

This Banjo NIP200-SH is a Schedule 80 polypropylene hex nipple designed for joining two female NPT ports. It provides a straight, rigid connection in fluid-handling systems rated for 300 psi maximum operating pressure.

Suitable Installations and Limitations

The fitting suits installers needing a 2-inch MNPT-to-MNPT link in Schedule 80 piping that operates between -20 and 150 degrees F. It is not for systems exceeding the 300 psi rating, for temperatures outside the stated range, or for joining dissimilar thread standards.

Decisive Specification

The critical figure is the 300 psi maximum operating pressure combined with the Schedule 80 wall thickness; both must match the system design pressure and pipe schedule for a safe, code-compliant joint.

Highlights

  • Rated for 300 psi maximum operating pressure
  • Schedule 80 wall thickness for heavy-duty service
  • Polypropylene construction resists corrosion and chemicals
  • Operates from -20 to 150 degrees Fahrenheit
  • 2 in MNPT threads on both ends

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandBanjo
ModelNIP200-SH

Questions about this item

Will the 2 in MNPT threads on this Schedule 80 hex nipple mate with my existing Schedule 80 piping?

Yes, both ends are 2 in Male NPT with 11 1/2 threads per inch, matching Schedule 80 pipe threads of the same size.

How can I verify the Banjo NIP200-SH is holding pressure after installation?

Pressurise the system up to 300 psi at ambient temperature and inspect the two MNPT joints for leaks; the polypropylene body is rated for -20 to 150 °F.

Does the NIP200-SH come with thread sealant or gaskets, or must I buy them separately?

The box contains only the black polypropylene hex nipple; PTFE tape or pipe dope for the 2 in MNPT connections must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.