We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 316 stainless steel 80 mesh Y strainer screen 1 in diameter 4 in length

Banjo

Banjo LS780 80 Mesh Y Strainer Screen 1/2 3/4 In

SKU CH-ZVRS-HNBYJ

80-mesh 316 stainless-steel screen filters debris in 1/2- to 3/4-inch Y-strainers at 177-micron precision

  • TypeDrain Components
  • 80-mesh filtration traps fine debris
  • 177-micron rating ensures precise particle capture
  • 316 stainless steel screen resists corrosion
  • fits LS050-80 and LS075-80 strainers
  • yellow colour allows quick visual identification

Exact Fit for LS Series Strainers

The Banjo LS780 is a replacement mesh screen designed for Y-strainer bodies LS050-80 and LS075-80. It fits 1/2 and 3/4 inch line sizes used in agricultural spraying and fluid transfer systems. The 316 stainless steel construction resists corrosion from fertilizers and chemicals. This screen restores filtration performance without replacing the full housing.

80 Mesh Filtration with 316 Stainless Steel

An 80 mesh rating with a .007 inch opening captures particles down to 177 micron during normal flow. The 316 stainless steel screen withstands chemical exposure and pressure cycles without degrading. The one inch diameter by four inch length seats securely inside compatible Banjo bodies. No additional gaskets or tools are required for installation.

Direct Replacement Screen Only

The package contains the single perforated screen in yellow colour coding for 80 mesh identification. No housing, end caps, or mounting hardware are included. Buyers needing a complete strainer assembly or a different micron rating must source the body or alternative screen separately. Compatible Grainger part numbers are 3DTZ4 and 3DTZ7 for cross-reference.

Highlights

  • 80-mesh filtration traps fine debris
  • 177-micron rating ensures precise particle capture
  • 316 stainless steel screen resists corrosion
  • fits LS050-80 and LS075-80 strainers
  • yellow colour allows quick visual identification

Specifications

TypeDrain Components
BrandBanjo
ModelLS780

Questions about this item

How do I install the LS780 screen into a Y strainer, and what step is often missed?

Remove the strainer cap, drop the 1 in diameter by 4 in long 316 stainless screen into the body with the yellow end visible, then reseat the gasket before tightening — skipping the gasket causes bypass.

What maintenance or replacement will the 80 mesh screen need over time?

Clean the 177 micron 316 stainless mesh when flow drops; replace the screen if the perforations deform or the yellow colour fades, using compatible models LS050-80 or LS075-80.

What limit appears first when the strainer runs continuously at full flow?

The 0.007 in mesh openings load with debris first, increasing pressure drop across the 177 micron rating before the 316 stainless body shows any wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.