We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polypropylene 90-degree elbow with 3-inch barbed and male NPT ends

Banjo

Banjo HB300-90 3" Barbed x MNPT 90° Elbow Trap

SKU CH-7YJE-2P75E MPN HB300-90

Connects 3-inch hose to 3-inch male NPT threads at a 90-degree angle using black polypropylene for chemical resistance from -20 to 150 degrees F

  • TypeDrain Components
  • MaterialPolypropylene
  • ColorBlack
  • Polypropylene construction resists chemicals and corrosion
  • 90° elbow redirects flow in tight spaces
  • 3-inch barbed end grips hose securely
  • 3-inch male NPT threads into pipe fittings
  • Operating range from 20°F to 150°F

3-Inch Barbed Elbow Trap

The Banjo HB300-90 is a 90-degree elbow trap designed for three-inch hose and pipe connections. It suits installers joining a barbed hose end to a male NPT threaded fitting in fluid transfer systems.

Three-Inch Flow Capacity

The barb and thread both measure three inches, giving full-bore passage for high-volume liquid or suction lines. The polypropylene body handles temperatures from 20 below to 150 degrees Fahrenheit, so it covers most water, chemical and agricultural duties.

Polypropylene Thermal Behaviour

Polypropylene construction resists corrosion and stays rigid across the rated temperature span without softening or cracking. The material adds negligible weight to the assembly and requires no external power, so noise and heat dissipation are not factors in normal use.

Highlights

  • Polypropylene construction resists chemicals and corrosion
  • 90° elbow redirects flow in tight spaces
  • 3-inch barbed end grips hose securely
  • 3-inch male NPT threads into pipe fittings
  • Operating range from 20°F to 150°F

Specifications

TypeDrain Components
MaterialPolypropylene
ColorBlack
BrandBanjo
ModelHB300-90

Questions about this item

Will the 3-inch barb and MNPT threads on this Banjo HB300-90 connect to my existing 3-inch hose and pipe?

The fitting has a 3-inch hose barb on one end and a 3-inch male NPT thread on the other, so it joins a 3-inch ID hose to a matching female NPT port.

How can I verify the 90-degree elbow is seated and sealed correctly after installation?

Tighten the hex head until the barb is fully inserted into the hose and the NPT threads are engaged; then run water through the line and check for leaks at both connections.

Does the HB300-90 come with clamps or sealant, or do I need to buy them separately?

Only the polypropylene elbow is supplied; hose clamps for the barb and thread sealant for the NPT connection must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.