Banjo
Banjo HB125-90 Barbed Hose Fitting 1-1/4 in 90 Degree Elbow Polypropylene
Barbed hose elbow joins 1-1/4 in hose to threaded connection in polypropylene rated from -20 to 150 °F
- Durable polypropylene construction resists corrosion and chemicals
- 90-degree elbow design enables tight-space hose routing
- 1-1/4 inch barb fits matching hose ID securely
- Reusable fitting allows disassembly and reinstallation
- Operating range from -20 to 150 degrees F
Banjo HB125-90 Barbed Hose Fitting
The Banjo HB125-90 is a 90-degree elbow hose fitting made from polypropylene. It connects a 1-1/4 inch hose barb to a matching 1-1/4 inch threaded connection. Both ends are male gender and the fitting features a 1-3/4 inch hex head for installation. It is supplied new and rated for reuse.
Suits fluid transfer needing a 90-degree turn
This fitting suits systems requiring a right-angle connection between 1-1/4 inch hose and a threaded port. It is not for vacuum service because the vacuum rating is not rated. It is not for temperatures below -20 degrees F or above 150 degrees F. Buyers needing a different hose size or thread type should look elsewhere.
Handles 1-1/4 inch hose within temperature limits
The fitting comfortably handles 1-1/4 inch ID hose within the -20 to 150 degrees F temperature range. Polypropylene construction provides chemical resistance for many fluid types. It runs out at the stated temperature extremes and cannot be used for vacuum applications. The reusable design allows disassembly and reinstallation.
Highlights
- Durable polypropylene construction resists corrosion and chemicals
- 90-degree elbow design enables tight-space hose routing
- 1-1/4 inch barb fits matching hose ID securely
- Reusable fitting allows disassembly and reinstallation
- Operating range from -20 to 150 degrees F
Specifications
| Brand | BANJO |
|---|
Questions about this item
What size hose and thread does the HB125-90 need to connect?
The fitting accepts 1-1/4 inch hose on its barbed end and a matching 1-1/4 inch male thread on the other end, so both the hose and the mating port must be that size.
Can I keep my existing polypropylene hose and fittings when adding this elbow?
Yes, the elbow is made entirely of polypropylene and uses the same 1-1/4 inch barb and thread dimensions, so it joins directly to compatible polypropylene hose and fittings you already have.
How can I confirm the elbow is sealed and flowing correctly after installation?
Pressurise the line up to the system's working pressure, inspect the barb and threaded joints for leaks, and verify fluid flows smoothly through the 90-degree turn without restriction.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
