We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Polypropylene cam lever coupling, 2 inch male adapter with MNPT thread

Banjo

Banjo 200F 2" Male Adapter x MNPT Cam Lever Trap

SKU CH-BSRK-6CA8X MPN 200F

A 2-inch polypropylene cam-and-groove adapter with male NPT threads, rated to 300 psi at 70°F and supplied with an EPDM gasket

  • TypeDrain Components
  • 2" NPT male thread connects directly to pipework
  • Polypropylene body resists corrosion and chemical attack
  • EPDM gasket provides reliable sealing up to 300 psi
  • Cam-lever design allows quick tool-free assembly
  • Rated for 300 psi working pressure at 70 °F

2 in Cam Lever Coupling

The Banjo 200F is a 2 in Type F cam and groove adapter built for quick fluid-line connections. Its polypropylene body and EPDM gasket suit agricultural, industrial and chemical-transfer systems that need a simple male-to-NPT transition. The locking arm is not included, so the joint relies on the cam lever alone for engagement.

300 psi Working Pressure Limit

Maximum working pressure is rated at 300 psi measured at 70 F. Polypropylene strength drops as temperature rises, so lines operating above that temperature must be derated accordingly. The 2 in 11-1/2 NPT thread seals against the female port, while the 2 15/32 in plug diameter governs the groove-side fit.

2 in Nominal Size Decides Fit

The coupling size, thread size and hose fitting size are all 2 in, making this the single dimension that determines whether the adapter matches the existing plumbing. Overall length is 3 3/4 in and plug length is 1 29/32 in, but the 2 in nominal bore is the figure that confirms compatibility.

Highlights

  • 2" NPT male thread connects directly to pipework
  • Polypropylene body resists corrosion and chemical attack
  • EPDM gasket provides reliable sealing up to 300 psi
  • Cam-lever design allows quick tool-free assembly
  • Rated for 300 psi working pressure at 70 °F

Specifications

TypeDrain Components
BrandBanjo
Model200F

Questions about this item

Should I choose the 2 in size for a 2 in NPT pipe?

Yes, the coupling size is 2 in and the thread size is 2 in -11-1/2 NPT, so it matches a 2 in NPT pipe directly.

What does the 300 psi rating mean once the fitting is installed?

It is the maximum working pressure at 70 F; the joint will hold up to 300 psi at that temperature.

How does the NPT thread affect what I can connect?

The male NPT thread seals on tapered pipe threads, so it connects to any 2 in female NPT port without extra adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.