We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Polypropylene cam-and-groove coupling, Type D, 2-inch socket and hose fitting, EPDM gasket, 3-1/8 inch overall length

Banjo

Banjo 200D Type D 2 in Coupling 2 in Hose Fitting Trap

SKU CH-E95Q-H7C4R MPN 200D

A polypropylene Type D cam-and-groove coupling with a 2-inch NPT thread and EPDM gasket rated to 200 psi at 70 °F

  • TypeDrain Components
  • MaterialHAWA
  • Type D cam-and-groove design enables quick hose connections
  • Polypropylene body resists corrosion in plumbing applications
  • 2-inch NPT female thread fits standard pipe sizes
  • EPDM gasket seals reliably at 200 psi working pressure
  • Compact 3-1/8 inch length suits tight installation spaces

Coupling type and size

The Banjo 200D is a Type D cam and groove coupling with a 2 in coupling size and a 2 in hose fitting. It uses a female NPT connection and a socket inside diameter of 2 9/16 in. The body is constructed from polypropylene with an EPDM gasket and an overall length of 3 1/8 in.

Suitable uses and limits

This fitting suits fluid-transfer assemblies that require a quick-disconnect cam and groove connection at 2 in NPT. It is not intended for systems that exceed the rated pressure or that demand a built-in locking arm for secure engagement. Buyers needing a different thread standard or a larger bore should select another model.

Pressure capacity and headroom

The maximum working pressure is 200 psi at 70 F, providing headroom for typical low-pressure discharge or suction lines. Performance drops as temperature rises above the reference point, so the fitting runs out of margin in high-temperature or high-pressure service beyond the stated rating.

Highlights

  • Type D cam-and-groove design enables quick hose connections
  • Polypropylene body resists corrosion in plumbing applications
  • 2-inch NPT female thread fits standard pipe sizes
  • EPDM gasket seals reliably at 200 psi working pressure
  • Compact 3-1/8 inch length suits tight installation spaces

Specifications

TypeDrain Components
MaterialHAWA
BrandBanjo
Model200D

Questions about this item

What thread standard does my piping need for the 2 in NPT connection?

The coupling uses a 2 in NPT thread with 11 1/2 threads per inch, so your pipe or adapter must match that same thread form.

Will the polypropylene body and EPDM gasket handle fluids at 70 F up to 200 psi alongside my existing metal fittings?

Yes, the body is rated for 200 psi at 70 F and the EPDM gasket is compatible with many water-based fluids used in mixed-material systems.

How can I confirm the coupling is sealed correctly after assembly?

Pressurise the line to the working pressure and check the gasket seat and cam arms for any visible leakage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.