We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Polypropylene cam-and-groove adapter, 2-inch male by 2-inch FNPT, EPDM gasket

Banjo

Banjo 200A Cam & Groove Fitting Type A 2 in Male Adapter x 2 in FNPT

SKU CH-T6G7-57M8J MPN 200A

2 in polypropylene cam-and-groove adapter with 2 in FNPT thread rated 225 psi at 70 F

  • TypeDrain Components
  • Secure 225 psi seal at 70°F with EPDM gasket
  • Direct 2 in FNPT thread fits existing piping
  • Polypropylene body resists chemical corrosion
  • Compact 3 3/16 in length saves installation space
  • Type A cam design enables quick tool-free connection

Product Identity

The Banjo 200A is a polypropylene cam and groove fitting with a 2 inch male adapter and 2 inch FNPT female thread. Rated for 225 psi at 70 F, it provides a quick-connect coupling for fluid transfer lines. The plug measures 2 1/2 inch outside diameter and 2 1/16 inch length with an EPDM gasket.

Suitability Guide

This fitting suits installers who need a Type A cam and groove adapter with NPT threads for polypropylene piping systems. It is not for buyers who require a locking arm mechanism, a different coupling size, or a higher pressure rating than 225 psi at 70 F.

Deciding Specification

The critical specification is the 2 inch Type A cam and groove male adapter combined with a 2 inch FNPT thread, which must match the mating coupling and port on your existing equipment.

Highlights

  • Secure 225 psi seal at 70°F with EPDM gasket
  • Direct 2 in FNPT thread fits existing piping
  • Polypropylene body resists chemical corrosion
  • Compact 3 3/16 in length saves installation space
  • Type A cam design enables quick tool-free connection

Specifications

TypeDrain Components
BrandBanjo
Model200A

Questions about this item

What thread size does the 2 in FNPT connection on this Type A adapter use?

The female NPT connection uses a 2 In. -11 1/2 thread size for a standard pipe-thread seal.

How do you secure the cam arms when installing this 200A fitting, and what common step is missed?

Close both cam arms fully until they lock over the groove; the step often missed is verifying the EPDM gasket is seated flat before locking.

When should the EPDM gasket on this 2 in polypropylene adapter be replaced?

Replace the EPDM gasket if you see cracking, hardening, or any leak path at the cam groove during routine inspection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.