We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White polypropylene cam lever coupling with male adapter and threaded end

Banjo

Banjo 100F 1 inch Male Adapter MNPT Cam Lever Coupling

SKU CH-0C0D-3ZNGE MPN 100F

Connects 1" NPT threads with a glass-filled polypropylene cam lever coupling rated to 300 psi

  • TypeDrain Components
  • MaterialHAWA
  • 1" male adapter fits standard NPT threads for quick, leak-free connections
  • Glass-filled polypropylene body resists impact and chemical wear
  • Stainless steel rings, arms and pins prevent corrosion under pressure
  • Rated to 300 psi maximum operating pressure for demanding fluid lines
  • Finger-ring cam levers open and close smoothly without tools

1" Male Adapter MNPT Coupling

This Banjo 100F coupling connects a 1-inch male adapter to a 1-inch male NPT thread. It is made from glass-filled polypropylene for rugged strength and durability. Stainless steel rings, arms, and pins ensure smooth operation and a long service life. The precision-molded design guarantees a uniform and accurate fit every time.

Suits fluid transfer systems needing quick

Installers who require a versatile, interchangeable cam lever coupler for standard NPT threads will find this part reliable. It is not suitable for applications exceeding the 300 psi maximum operating pressure rating. Buyers who need a different thread size or a female-threaded connection must select another model from the series. The coupling must never be disconnected while the line is under pressure or contains liquid.

Maximum operating pressure 300 psi

This pressure limit is the critical specification that determines if the coupling matches the system requirements. Exceeding this rating risks component failure and potential safety hazards. Always verify the system pressure against this 300 psi figure before installation. The warning against disconnecting under pressure reinforces this operational boundary.

Highlights

  • 1" male adapter fits standard NPT threads for quick, leak-free connections
  • Glass-filled polypropylene body resists impact and chemical wear
  • Stainless steel rings, arms and pins prevent corrosion under pressure
  • Rated to 300 psi maximum operating pressure for demanding fluid lines
  • Finger-ring cam levers open and close smoothly without tools

Specifications

TypeDrain Components
MaterialHAWA
BrandBanjo
Model100F

Questions about this item

What pressure does the 300 psi rating actually limit in daily use?

The 300 psi maximum operating pressure caps the system pressure you can safely run through the polypropylene body and stainless steel cam components.

What thread and clearance does the 1 inch MNPT end need to seal properly?

It requires a matching 1 inch female NPT port and enough wrench flats access to tighten the male adapter without stripping the glass-filled polypropylene threads.

How do you assemble the cam lever without cross-threading the adapter?

Align the male adapter square to the female coupler, hand-tighten until the gasket seats, then close the cam levers by pulling the finger rings — never force the levers if threads bind.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.