We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black Toslink splitter with one male input and two female outputs

Bangun Ban-splitter-1x2s 1x2 Toslink Splitter

SKU CH-FSNH-GRWE4 MPN Ban-splitter-1x2s

Splits one Toslink optical input into two outputs for simultaneous soundbar and headset use with independent volume control.

  • Mount Size1 in 2 Out Toslink Splitter
  • Colorstraight plug
  • Specification1 in 2 Out
  • Network InterfaceOptical
  • Component1 In
  • Display1 in 2 Out - Bangun - Ban-splitter-1x2s
  • Splits one optical port into two outputs
  • Runs soundbar and headset together with independent volume
  • Plug-and-play with PC, consoles, Blu-ray and HDTV
  • Supports uncompressed PCM and 5.1 to 7.1 surround sound
  • Low-loss fibre under .2 dB per metre up to 150 ft

One-to-Two Optical Audio Splitter

This passive Toslink splitter takes a single digital optical input and routes it to two female outputs simultaneously. It requires no external power and works with any device that provides a standard optical audio signal. The unit is built with a solid PVC outer layer and gold-plated connectors for corrosion resistance. It is intended for home-theatre, gaming-console or PC setups that need to feed two optical receivers at once.

Simultaneous Soundbar and Headset Operation

The splitter lets a TV, console or Blu-ray player drive a soundbar and a wireless headset base station at the same time, each with its own volume control. Optical fibre loss is below .2 dB per metre and the signal reaches up to 150 ft without degradation. Supported audio formats include uncompressed PCM and 5.1 to 7.1 surround sound such as Dolby Digital Plus, DTS-HD High Resolution and LPCM. No software or drivers are required for operation.

Ideal for Dual-Optical Receivers.

Buyers who want to send one optical source to two destinations — for example a soundbar plus a headphone transmitter — will find this plug-and-play device fits the need. It does not switch between outputs; both remain active continuously. Users who need more than two optical outputs, require an active amplifier for longer runs, or want HDMI audio extraction should look at a different type of product.

Highlights

  • Splits one optical port into two outputs
  • Runs soundbar and headset together with independent volume
  • Plug-and-play with PC, consoles, Blu-ray and HDTV
  • Supports uncompressed PCM and 5.1 to 7.1 surround sound
  • Low-loss fibre under .2 dB per metre up to 150 ft

Specifications

BrandBangun
ModelBan-splitter-1x2s
Part NumberBan-splitter-1x2s
Mount Size1 in 2 Out Toslink Splitter
Colorstraight plug
Specification1 in 2 Out
Network InterfaceOptical
Component1 In
Display1 in 2 Out - Bangun - Ban-splitter-1x2s
Power Supplyfalse
Feature1 in 2 Out
Dimensions1.0922 cm x 21.4122 cm x 25.8064 cm
Weight0.018 kilograms
Package Content1

Questions about this item

Will the optical connectors or PVC housing need replacement after extended use?

The splitter uses gold-plated Toslink connectors and a solid PVC outer layer built for corrosion resistance, so no routine connector or housing replacement is expected.

What is the maximum cable length before signal loss becomes noticeable?

Optical fiber loss is under 0.2 dB per metre and the output signal is rated for distances up to 150 ft.

Does the unit generate any heat or noise when powered continuously?

The device has no power supply and no active electronics, so it produces no heat and no audible noise during all-day operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.