Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00931826BTC
In stock
Bambeleg LED Lamp Kit 001 RGB 4pcs 5V USB 1.5m
Four USB-powered COB LED modules with remote RGB and dimming control, designed for Bambu Lab printers
- Product nameBambeleg
- weight0.355 kilograms
- descriptionBambeleg
- Plug-and-play fit for Bambu Lab X1/P1 series printers
- Remote-controlled RGB colours and dimming for custom ambience
- 4 W COB LED in aluminium housing for even, lasting light
- 5 m USB cable powers from any standard 5 V port
- Four lamps weigh .355 kg for easy mounting anywhere
Designed for Bambu Lab X1 and P1
This four-piece LED lamp kit is precision-engineered to integrate with 3D-printed Bambu Lab X1 and P1 series models. The plug-and-play design guarantees a factory-original look once the structural parts are printed from free MakerWorld files. It targets makers who want seamless lighting inside their printer enclosure. ||
USB power and 1.5-metre cable limit placement
Each lamp draws 4 watts from a 5 V USB source rated at 3 A. The fixed 1.5-metre cable restricts how far the units can sit from a charger, power bank or computer port. Builders needing longer runs or higher-voltage input cannot use this kit without modification. ||
Snap-in install with printed brackets required
Installation is straightforward once the 3D-printed brackets are ready; the lamps snap into place and the USB plugs connect in seconds. The main friction point is printing and preparing the structural parts yourself, as none are included in the box. Missing or warped prints will delay the setup.
Highlights
- Plug-and-play fit for Bambu Lab X1/P1 series printers
- Remote-controlled RGB colours and dimming for custom ambience
- 4 W COB LED in aluminium housing for even, lasting light
- 5 m USB cable powers from any standard 5 V port
- Four lamps weigh .355 kg for easy mounting anywhere
Specifications
| Brand | Bambeleg |
|---|---|
| Product name | Bambeleg |
| weight | 0.355 kilograms |
| description | Bambeleg |
| Part Number | LED Lamp-3 |
Questions about this item
Should I choose the four-piece kit or a single lamp for my Bambu Lab printer?
The listing supplies four lamps in one package, each with its own 1.5 m USB cable and remote control, so you can light multiple sides of the enclosure or several printers at once.
What does the 4 W COB LED rating mean for actual brightness inside an enclosure?
A 4 W chip-on-board LED produces a strong, even glow that easily illuminates the print volume; the remote lets you dim from a soft glow to full output to match the ambient light.
The kit uses a 5 V USB connection — will it run from my printer's USB port?
Each lamp draws power from a standard 5 V USB source; the 1.5 m cable reaches a printer port, phone charger, power bank or PC without needing an extra adapter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
