Baldwin RGB LED Strip Light Kit 50cm 18 LED 24-Key Remote SATA 12V
Magnetic 50 cm RGB LED strip with 18 LEDs, 24-key remote, and SATA power for PC cases
- TypeLED Light Fixtures
- Lamp TypeFluorescent
- LocationIndoor
- ShapeRectangle
- Housing ColorRGB (Red, Green, Blue)
- Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
- Magnetic mounting secures strips to iron cases without adhesive
- 18 high-brightness 5050 SMD LEDs deliver vivid RGB illumination
- 24-key IR remote provides 16 static colours and 4 dynamic modes
- SATA power connector draws 12 V DC from any PSU
- 50 cm strip with 20 cm lead fits mid and full towers
50 cm RGB LED Strip Kit
This kit contains two 50 cm LED strips with 18 5050 SMD LEDs each and a 24-key infrared remote. It is designed for PC builders who want magnetic interior lighting for iron-case side panels or frames. The strips draw power from a standard SATA connector on the power supply.
12 V SATA Power Limit
The system runs on DC 12 V supplied through a SATA plug, so it cannot operate from a 5 V header or a motherboard RGB connector. The 4.32 W total draw is modest, but the controller only accepts the bundled SATA cable. Users without a free SATA power lead cannot connect the kit.
Magnetic Mount on Iron Only
Strong NdFeB magnets hold the strips and the control box cables to any ferrous surface, removing the need for adhesive on the LED strips themselves. The control box uses a separate foam-tape pad that must stick to a clean metal panel. The infrared receiver on the box needs line of sight to the remote, so a closed solid side panel will block signals unless a window or vent is present.
Highlights
- Magnetic mounting secures strips to iron cases without adhesive
- 18 high-brightness 5050 SMD LEDs deliver vivid RGB illumination
- 24-key IR remote provides 16 static colours and 4 dynamic modes
- SATA power connector draws 12 V DC from any PSU
- 50 cm strip with 20 cm lead fits mid and full towers
Specifications
| Brand | Baldwin |
|---|---|
| Type | LED Light Fixtures |
| Lamp Type | Fluorescent |
| Location | Indoor |
| Shape | Rectangle |
| Housing Color | RGB (Red, Green, Blue) |
| Compatibility/Fitment | Out-Opening, Narrow Stile, Store Front Doors |
| Voltage | 110V |
| Watts | 4.32 watts |
| Parts | 1 Year |
| Labor | 1 Year |
| Part Number | DXG-strip light |
Questions about this item
How do I decide between the 50 cm strip with 18 LEDs and the 30 cm signal cable length?
The 50 cm strip contains 18 LEDs and includes a 20 cm cable; the separate 30 cm signal wire runs from the controller to the strip, so choose based on how far the controller sits from the mounting area.
What does the 5050 SMD LED rating mean for brightness inside a case?
5050 SMD LEDs are larger chips that produce higher lumen output per diode, giving strong RGB illumination across the 50 cm length while drawing only 4.32 watts at 12 V.
How does the SATA power connector limit the kit in a typical build?
The SATA plug draws 12 V directly from the PSU, capping total power to the strip and controller at the 4.32 watt rating and preventing software voltage control beyond the IR remote.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
