Baldwin PIR Motion Sensor Light Socket E26 E27 60W 2Pack
A PIR motion-sensing E26/E27 lamp holder that auto-switches bulbs up to 60 W, with adjustable 10-second to 5-minute timing and 3-2000 lux sensitivity
- TypeLED Light Fixtures
- Lamp TypeFluorescent
- LocationIndoor
- Housing Colorwhite
- Color Temperaturewhite
- Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
- Tool-free E26/E27 installation screws into existing socket
- PIR sensor detects motion up to 10 feet away
- Adjustable timer 10 seconds to 5 minutes plus 3-2000 lux threshold
- Auto on/off saves energy with no wiring required
- 60W max load fits garage, basement, porch, storage room
Simple E26/E27 socket adapter
This Baldwin two-pack converts any standard E26 or E27 lamp holder into a motion-activated light point. You screw the unit into the existing socket, add a bulb up to 60 W, and the built-in PIR sensor switches the light on when it detects movement up to 10 feet away.
Indoor spaces needing hands-free light
The adapter suits garages, basements, porches, storerooms and stairwells where a quick, tool-free upgrade is wanted. It is not for fixtures mounted higher than 10 feet, for fittings with shades that block the sensor, for outdoor lanterns enclosed in glass, for horizontal mounting, for loads above 60 W, or for heat-lamp bulbs.
Adjustable timer and lux threshold
The timer can be set from 10 seconds to 5 minutes and the illumination trigger from 3 to 2000 lux, letting you decide how long the light stays on and how dark it must be before the sensor activates.
Highlights
- Tool-free E26/E27 installation screws into existing socket
- PIR sensor detects motion up to 10 feet away
- Adjustable timer 10 seconds to 5 minutes plus 3-2000 lux threshold
- Auto on/off saves energy with no wiring required
- 60W max load fits garage, basement, porch, storage room
Specifications
| Brand | Baldwin |
|---|---|
| Type | LED Light Fixtures |
| Lamp Type | Fluorescent |
| Location | Indoor |
| Housing Color | white |
| Color Temperature | white |
| Compatibility/Fitment | Out-Opening, Narrow Stile, Store Front Doors |
| Features | Widely Use |
| Part Number | motion sensor light switch-01 |
Questions about this item
Does the 2-pack include bulbs or only the E26/E27 sensor sockets?
The pack contains two PIR motion sensor sockets with E26/E27 bases. Bulbs are not included and must be purchased separately.
Which base type should I choose between E26 and E27 for my fixtures?
Both E26 and E27 bases are supported by each socket, so a single version fits either standard.
What does the 60 W maximum load mean for the LED bulbs I can use?
Any E26/E27 bulb up to 60 W works; higher-wattage LED garage lights or heat lamps are not supported.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
