Baldwin PIR Motion Sensor Light Socket E26 E27 60W 100-240V
Converts E26 or E27 bulbs into motion-activated lights with adjustable time and lux settings for indoor use
- TypeLED Light Fixtures
- Lamp TypeFluorescent
- LocationIndoor
- ShapeRectangle
- Housing ColorWhite
- Housing MaterialMetal
- Automatically lights when motion detected up to 12 feet away
- Adjustable timer from 10 seconds to 5 minutes and light sensitivity from 3 to 2000 LUX
- Fits standard E26 and E27 bulbs up to 60 watts on 100-240V AC
- Tool-free installation converts any indoor fixture to motion-activated lighting
- 360-degree PIR detection works in basements, closets, corridors and storage rooms
Indoor Motion-Sensor Lamp Holder
The Baldwin PIR socket screws into any standard E26 or E27 fitting and converts a regular bulb into an automatic light. It is rated for 60 W maximum load and accepts 100 to 240 V AC, so it works on 110 V or 230 V supplies. Designed for indoor locations such as basements, pantries, storerooms and corridors, it requires an open shade facing downwards because glass blocks the sensor.
Adjustable Time and Lux Controls
Two onboard dials let you tailor behaviour without tools: the Time button sets how long the lamp stays on from 10 seconds up to 5 minutes, and the Lux button defines the ambient threshold between 3 and 2000 lux so the light only activates when needed. The passive infrared detector covers 360 degrees and reaches 12 feet when mounted 8 feet high, drawing negligible standby power while waiting for motion.
Sustained Operation in Enclosed Spaces
Because the unit must sit in an open fixture facing down, heat from the lamp dissipates freely and the sensor maintains its 6 metre detection range during continuous cycles. The adjustable delay prevents rapid re-triggering in busy corridors, and the wide voltage tolerance keeps performance stable across 110 V and 230 V circuits without flicker or premature shutdown.
Highlights
- Automatically lights when motion detected up to 12 feet away
- Adjustable timer from 10 seconds to 5 minutes and light sensitivity from 3 to 2000 LUX
- Fits standard E26 and E27 bulbs up to 60 watts on 100-240V AC
- Tool-free installation converts any indoor fixture to motion-activated lighting
- 360-degree PIR detection works in basements, closets, corridors and storage rooms
Specifications
| Brand | Baldwin |
|---|---|
| Type | LED Light Fixtures |
| Lamp Type | Fluorescent |
| Location | Indoor |
| Shape | Rectangle |
| Housing Color | White |
| Housing Material | Metal |
| Color Temperature | White |
| Compatibility/Fitment | Out-Opening, Narrow Stile, Store Front Doors |
| Voltage | 110V |
| Watts | 60 watts |
| Features | Widely Use |
| Part Number | LSE27 |
Questions about this item
How do I install the Baldwin PIR motion sensor socket and which way must it face?
Screw the socket into an E26 or E27 base, insert a bulb up to 60 W, then point the sensor downward in an open shade so the PIR window is not blocked by glass.
What maintenance will the socket need over time?
No scheduled maintenance is required; simply keep the sensor lens clean and replace the lamp when it fails, staying within the 60 W maximum.
What limit appears first during continuous operation?
The adjustable time-delay caps each activation at 5 min ±1 min, so the light will switch off after that period even if motion continues.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
