Baldwin Filters
Baldwin Filters PT288-HD10 Hydraulic Filter Element
A hydraulic cartridge filter with a 5 micron rating for PT288-HD case loaders and John Deere equipment
- TypeAutomotive Filters
- 5-micron rating captures fine contaminants
- 7-7/16 inch height fits PT288-HD case loaders
- 4-1/2 inch outside diameter matches Link-Belt backhoe specs
- 2-7/32 inch inside diameter aligns with Ford loader ports
- Two integral gaskets included for leak-free sealing
Baldwin PT288-HD10 hydraulic filter element
This cartridge-type hydraulic filter element serves operators of compatible Ford loaders, John Deere equipment and Link-Belt backhoes. It fits PT288-HD case loaders and optional equipment configurations where a 5-micron rating is specified. The element design allows direct replacement without a housing change.
5-micron cartridge filtration and flow
The 5-micron media captures fine particles to protect hydraulic components during normal operation. Two integral gaskets seal the element inside the existing case to prevent bypass leakage. Dimensions of 7 7/16 inches in height and 4 1/2 inches in outside diameter match the original housing specifications.
Two integral gaskets included
The supplied gaskets eliminate the need to source separate seals during a service interval. No thread engagement is required because the element seats by compression inside the PT288-HD case. The filter is sold as an element only, so the reusable case must already be present on the machine.
Highlights
- 5-micron rating captures fine contaminants
- 7-7/16 inch height fits PT288-HD case loaders
- 4-1/2 inch outside diameter matches Link-Belt backhoe specs
- 2-7/32 inch inside diameter aligns with Ford loader ports
- Two integral gaskets included for leak-free sealing
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Type | Automotive Filters |
Questions about this item
How do I install the PT288-HD10 cartridge into the PT288-HD case, and what step is often missed?
Slide the element into the case, then seat both integral gaskets — 2 7/32 in inside diameter — before tightening the lid; skipping the second gasket causes bypass.
What maintenance does the PT288-HD10 need after installation?
Replace the cartridge at the machine manufacturer's service interval; the 5-micron media is not cleanable and the integral gaskets are single-use.
What limit appears first when the PT288-HD10 runs continuously under load?
The 5-micron media loads with fine particles, raising restriction until the system bypass valve opens — typically the first sustained-use limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
