We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White cylindrical cartridge filter element with black end seals and grommet

Baldwin Filters

Baldwin Filters PT275-10 Transmission Filter Element 9-1/16"L

SKU CH-TTJE-FPSCS

Transmission filter cartridge rated at 9.8 microns with attached seals and grommet for PT275 applications

  • Width4-17/32"
  • Captures particles down to 9.8 microns for clean fluid
  • Cartridge design fits PT275 systems without extra parts
  • 9-1/16 inch height matches original equipment specs
  • 4-17/32 inch width ensures proper housing seal
  • Attached end seals and grommet simplify installation

Transmission filter element for PT275 systems

This Baldwin Filters cartridge replaces the transmission fluid filter on PT275 forward-drive units used in Dresser, International, Racine, Wagner and Yale & Towne equipment. The element carries a 9.8 micron rating and includes attached end seals and a grommet so no separate sealing parts are required.

Cartridge build with integrated seals

The metal end caps and centre tube are crimped to the pleated media, eliminating loose components during service. An attached grommet seats against the housing bore while the end seals close the flow path, so installation is a direct drop-in without additional gaskets or O-rings.

Verify housing compatibility before ordering

Confirm the transmission housing accepts a cartridge with a 1/2 inch inside diameter and 2 9/32 inch secondary bore, and that the thread size is listed as not applicable. The element is restricted from sale in certain states, so check local regulations before purchase.

Highlights

  • Captures particles down to 9.8 microns for clean fluid
  • Cartridge design fits PT275 systems without extra parts
  • 9-1/16 inch height matches original equipment specs
  • 4-17/32 inch width ensures proper housing seal
  • Attached end seals and grommet simplify installation

Specifications

BrandBALDWIN FILTERS
Width4-17/32"

Questions about this item

What micron rating does the PT275-10 filter element provide for transmission fluid?

The filter element has a 9.8 micron rating to capture contaminants in the transmission system.

What are the overall dimensions needed to confirm the PT275-10 fits the housing?

The cartridge measures 9-1/16 inches in height and length with a 4-17/32 inch outside diameter.

Which seals and grommets come attached to the PT275-10 for installation?

The element includes attached end seals and an attached grommet so no separate sealing parts are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.