Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081815BTC
In stock
Baldwin Filters
Baldwin Filters BT350 Hydraulic Filter 9.8 Micron 4-1/4 x 7-11/32 in
Hydraulic spin-on filter rated at 9.8 micron with 13/16 in thread and included gasket
- Width4-1/4"
- 8 micron rating traps fine hydraulic contaminants
- Spin-on design enables quick filter replacement
- Includes integral gasket for reliable sealing
- 13/16 inch thread fits standard hydraulic ports
- 7 11/32 inch length suits compact installations
Baldwin BT350 Hydraulic Spin-On Filter
The Baldwin BT350 is a new hydraulic spin-on filter rated at 9.8 microns for fine particle capture. It uses a 13/16 inch thread and measures 4 1/4 inches in outside diameter with a height of 7 11/32 inches. An I. Gasket is included to ensure a reliable seal during installation. Designed for hydraulic fluid systems requiring this specific micron rating and thread size.
Suits maintenance on equipment using 13/16 inch
This filter fits hydraulic systems that accept a 13/16 inch thread and require 9.8 micron filtration with the given dimensions. It is not for buyers who need a different micron rating, a different thread size, or a cartridge-style element instead of a spin-on canister. Systems with non-standard port threads or bypass valve requirements not matched by this unit should look elsewhere.
Verify thread size and housing clearance before
Confirm that your hydraulic system uses a 13/16 inch thread port and that the housing can accommodate a 4 1/4 inch diameter by 7 11/32 inch tall canister. Check that the 9.8 micron rating matches the fluid cleanliness specification for your application. Ensure the included I. Gasket material is compatible with your hydraulic fluid type.
Highlights
- 8 micron rating traps fine hydraulic contaminants
- Spin-on design enables quick filter replacement
- Includes integral gasket for reliable sealing
- 13/16 inch thread fits standard hydraulic ports
- 7 11/32 inch length suits compact installations
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Width | 4-1/4" |
Questions about this item
Which thread size must my hydraulic system have for the BT350 filter to screw on?
The filter uses a 13/16 in thread, so your housing needs the same 13/16 in male thread for a direct fit.
Will the 9.8 micron rating of the BT350 be too fine for an older hydraulic pump that originally used a coarser element?
A 9.8 micron rating is finer than many older elements; it will trap smaller particles but may clog faster if the system generates high contamination levels.
How can I confirm the BT350 is sealing correctly after installation?
After tightening, run the system to operating pressure and check the gasket joint for any hydraulic fluid weeping; a dry joint means the included gasket is sealing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
