We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Baldwin Filters

Baldwin Filters BF46111 Fuel Spin-On Filter 5 micron

SKU CH-8GB7-QFW68

Spin-on fuel filter rated at 5 microns for biodiesel and diesel systems on Bobcat, Case, Doosan, Hino and Yanmar equipment

  • Filters biodiesel and diesel at 5 micron
  • Spin-on design simplifies filter changes
  • Metal, plastic and paper media traps contaminants
  • M20 x 1.50 thread fits listed equipment
  • Attached gasket seals without extra parts

Baldwin BF46111 Fuel Spin-On Filter

The Baldwin BF46111 is a new fuel spin-on filter rated at 5 microns for biodiesel and diesel applications. It features a metal, plastic and paper construction with an attached gasket and M20-1.50 thread size. Dimensions are 3 1/4 in height and length with a 3 11/16 in outside diameter.

Vehicles and Equipment Compatibility

This filter fits Bobcat, Case loaders, Doosan compressors, Hino buses and Yanmar marine engines. It is not for buyers whose equipment requires a different thread size, micron rating or mounting style. Builders working on unlisted makes or petrol-only systems should verify specifications before purchasing.

5 Micron Filtration Rating

The 5 micron rating determines the particle size this element captures in biodiesel and diesel fuel. Match this specification exactly to the engine manufacturer's requirement to ensure proper fuel system protection. A different micron rating will not provide the intended filtration performance.

Highlights

  • Filters biodiesel and diesel at 5 micron
  • Spin-on design simplifies filter changes
  • Metal, plastic and paper media traps contaminants
  • M20 x 1.50 thread fits listed equipment
  • Attached gasket seals without extra parts

Specifications

BrandBALDWIN FILTERS

Questions about this item

How do I install the Baldwin BF46111 fuel spin-on filter and what step is often missed?

Thread the M20-1.50 filter onto the mounting base by hand until the attached gasket seats, then tighten an additional three-quarters of a turn; the step often missed is lubricating the gasket with clean fuel before installation.

What maintenance or replacement will the Baldwin BF46111 filter need later?

Replace the spin-on filter at the engine manufacturer's recommended service interval or sooner if fuel flow drops; the metal, plastic and paper element is not cleanable and must be swapped as a complete unit.

What limit appears first on the Baldwin BF46111 filter during sustained high-flow use?

The 5 micron paper media will reach its dirt-holding capacity first, causing a rising pressure drop that restricts fuel delivery and signals replacement is due.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.