Baldwin Filters
Baldwin Filters B76-SS Spin-On HVAC Control
Severe-service spin-on oil filter with 23 micron rating and integral gasket for heavy-duty engines
- ColorTransparent
- Severe-service protection with 23 micron filtration
- Spin-on design enables quick filter replacement
- Integral gasket included for reliable sealing
- Fits 1-1/8"-16 thread on heavy-duty engines
- Transparent housing allows visual condition checks
Baldwin Filters B76-SS Spin-On HVAC Control
The Baldwin Filters B76-SS is a spin-on oil filter built for severe-service lubrication. It uses a 23 micron rating to capture contaminants in heavy-duty engine systems. The housing includes an integral gasket and features a transparent colour for visual inspection. It is engineered for equipment requiring a 1 1/8"-16 thread connection.
Severe-Service Lube Spin-On Filter for Heavy
This filter suits maintenance on Akerman, Mack, V.M.E., Volvo and R.V.I. engines where a severe-service lube spin-on is specified. The 10-7/16 inch height and 4-1/4 inch diameter fit the designated housings on these platforms. Shops servicing gasoline-powered passenger vehicles or light commercial diesels not listed above should verify compatibility before fitting.
Thread Size 1 1/8"-16 Determines Fitment
The single specification that decides fitment is the 1 1/8"-16 thread size. The filter will only seal and function correctly on engine blocks or filter heads machined to this exact thread pitch. Always match this thread specification against the original equipment manual or the existing filter before installation.
Highlights
- Severe-service protection with 23 micron filtration
- Spin-on design enables quick filter replacement
- Integral gasket included for reliable sealing
- Fits 1-1/8"-16 thread on heavy-duty engines
- Transparent housing allows visual condition checks
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Color | Transparent |
Questions about this item
What thread size does the B76-SS spin-on filter use?
The filter uses a 1 1/8 in. -16 thread size for installation.
What are the physical dimensions of the B76-SS filter?
The filter height is 10-7/16 in. and the outside diameter is 4-1/4 in.
How is the B76-SS filter installed and what step is often missed?
Spin the filter onto the 1 1/8 in. -16 thread until the integral gasket contacts the base, then tighten by hand; do not overtighten with a wrench.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
