Baldwin Filters
Baldwin Filters B7507 Oil Filter Spin-On High Efficiency HVAC Control
High-efficiency spin-on oil filter rated at 9.8 microns for IHC MaxxForce 15 engines
- ColorTransparent
- High-efficiency 9.8 micron filtration protects IHC MaxxForce 15 engines
- Spin-on design with integral gasket enables quick tool-free installation
- Three included O-rings ensure reliable sealing on ProStar trucks
- 12-3/32 inch height fits standard 1-1/2-16 thread mounting points
- Transparent housing allows visual inspection of filter condition
Baldwin B7507 HVAC control for IHC MaxxForce 15
The Baldwin B7507 is a high-efficiency spin-on oil filter built for the IHC MaxxForce 15 engine found in ProStar trucks. It uses a 9.8 micron rating to capture fine contaminants and protect lubrication circuits. The transparent housing allows quick visual inspection of element condition. This control component suits fleets and owner-operators who need reliable filtration on heavy-duty diesel platforms.
Spin-on installation with included O-rings
The filter threads onto the engine with a 1 1/2 in.-16 thread size and ships with three O-rings plus an integral gasket for sealing. Spin-on design lets technicians remove and replace the unit with basic hand tools in minutes. The most common issue is cross-threading the large-diameter threads or reusing old O-rings, which can cause leaks or loss of oil pressure. Clean the mounting surface and torque to specification to avoid repeat work.
Sustained filtration on heavy-duty cycles
Under continuous operation the 9.8 micron media maintains flow while holding a high volume of soot and wear particles typical of MaxxForce 15 duty cycles. The 12-3/32 in. height and 5-3/8 in. outside diameter provide extended surface area for longer service intervals. Consistent pressure differential across the element indicates the filter is performing through full drain intervals without bypass activation.
Highlights
- High-efficiency 9.8 micron filtration protects IHC MaxxForce 15 engines
- Spin-on design with integral gasket enables quick tool-free installation
- Three included O-rings ensure reliable sealing on ProStar trucks
- 12-3/32 inch height fits standard 1-1/2-16 thread mounting points
- Transparent housing allows visual inspection of filter condition
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Color | Transparent |
Questions about this item
How do I confirm the B7507 oil filter is working correctly after installation on my IHC MaxxForce 15 engine?
After fitting the spin-on filter with its integral gasket and three O-rings, start the ProStar truck engine and check for oil leaks at the 1 1/2 In.-16 thread seal while verifying normal oil pressure.
What components come with the B7507 filter and what must I purchase separately for the ProStar truck installation?
The box includes the high-efficiency spin-on filter body, an integral gasket, and three O-rings; no additional seals are required for the IHC MaxxForce 15 application.
Which micron rating version of the B7507 should I select for the IHC MaxxForce 15 engine?
This model is offered with a single 9.8 micron high-efficiency rating designed for the IHC MaxxForce 15 engine in ProStar trucks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
