Baldwin Filters
Baldwin Filters B7163 Spin-On HVAC Control
Spin-on oil filter with 25 micron rating, M20 x 1.5 thread and 35 psid bypass valve
- ColorTransparent
- 25 micron rating traps fine contaminants
- M20 x 1.5 thread fits compatible housings
- 35 psid bypass valve maintains flow under pressure
- Integral gasket seals without extra parts
- 8-3/32 inch length suits standard installations
Baldwin B7163 Spin-On HVAC Control
The Baldwin B7163 is a spin-on HVAC control filter designed for automotive systems requiring an M20 x 1.5 mm thread. It fits installations where a 25 micron filtration rating and a 35 psid bypass valve are specified. The transparent housing allows visual inspection of the element condition without removal.
Thermals noise and power draw
As a passive filtration component the B7163 generates no heat, consumes no electrical power and produces no audible noise during operation. The integral gasket maintains a consistent seal across normal operating pressure ranges. Flow restriction stays within the 25 micron rating until the bypass valve activates at the rated differential.
Build quality and connectors
The spin-on canister uses a metal shell with an integral gasket for tool-free installation onto the M20 x 1.5 mm mounting boss. Dimensions of 8-3/32 inches in height and 3-23/32 inches in outside diameter determine the clearance envelope required in the engine bay. The 35 psid bypass valve protects downstream components if the element becomes heavily loaded. This filter is not suited for applications needing a different thread pitch or a finer micron rating.
Highlights
- 25 micron rating traps fine contaminants
- M20 x 1.5 thread fits compatible housings
- 35 psid bypass valve maintains flow under pressure
- Integral gasket seals without extra parts
- 8-3/32 inch length suits standard installations
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Color | Transparent |
Questions about this item
How do I install the Baldwin Filters B7163 spin-on filter and what is the common mistake with the M20 x 1.5mm thread?
Hand-tighten the filter onto the M20 x 1.5mm thread until the integral gasket seats, then turn an additional three-quarters of a turn; the common mistake is using a wrench for the final tightening, which over-compresses the gasket and can cause leaks.
What maintenance does the B7163 require and when should the filter be replaced?
The B7163 is a disposable spin-on oil filter; replace it at every engine oil change interval recommended by the vehicle manufacturer, as the 25 micron media and integral gasket are not serviceable.
What is the first limitation of the B7163 under sustained high-pressure operation?
The integrated 35 psid bypass valve opens when pressure differential reaches that threshold, allowing unfiltered oil to circulate and signalling that the 25 micron media is saturated.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
