Baldwin Filters
Baldwin Filters B7128 HVAC control 18 micron 50 psid
Spin-on oil filter rated at 18 microns with a 50 psid bypass valve for Fendt, Renault tractors and Sullair compressors
- ColorTransparent
- 18-micron filtration traps fine contaminants
- 50 psid bypass valve maintains flow under pressure
- Anti-drainback valve prevents dry starts
- 3/4"-16 thread fits Fendt, Renault tractors and Sullair compressors
- New Baldwin Filters spin-on element for HVAC systems
Baldwin Filters B7128 spin-on oil filter
The Baldwin Filters B7128 is a spin-on oil filter built with an 18 micron rating and a 50 psid bypass valve. It uses a 3/4"-16 thread for direct mounting on compatible engines and compressors. An anti-drainback valve keeps oil in the canister after shutdown. The unit is supplied new in a transparent housing.
Replaces worn or clogged spin-on filters on listed
This filter fits Fendt and Renault tractors as well as Sullair compressors that specify the same thread and dimensions. The upgrade is worth it when the old element has reached its service interval or when pressure drop across the media approaches the bypass threshold. It does not suit equipment requiring a different thread pitch, a finer micron rating or a higher bypass setting.
Simple spin-on installation with standard tools
Installation consists of removing the old filter, lubricating the new gasket and spinning the B7128 on by hand until the gasket seats, then tightening the specified additional turn. Common issues include cross-threading the 3/4"-16 thread, over-tightening which can distort the canister, and forgetting to pre-fill the canister on horizontal mounts. The transparent body allows a quick visual check for leaks after startup.
Highlights
- 18-micron filtration traps fine contaminants
- 50 psid bypass valve maintains flow under pressure
- Anti-drainback valve prevents dry starts
- 3/4"-16 thread fits Fendt, Renault tractors and Sullair compressors
- New Baldwin Filters spin-on element for HVAC systems
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Color | Transparent |
Questions about this item
What thread size does the B7128 need to mount on the engine?
The B7128 uses a 3/4 In. -16 thread to spin onto the mounting base.
How do you install the spin-on filter and what step is often missed?
Lubricate the gasket, spin the filter on until the gasket contacts the base, then tighten a further three-quarters of a turn; skipping the gasket lube causes leaks.
When should the B7128 be replaced and what indicates it is due?
Replace at the tractor or compressor manufacturer's service interval; the internal 50 psid bypass valve opens when the element is clogged, signalling the filter has reached its limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
