Baldwin E26/E27 Motion Sensor Light Socket 100W 110-240V 50/60Hz
Converts any E26 or E27 bulb into a motion-activated light with adjustable 160-degree sensor head, 8-metre detection range and 5-second to 8-minute timer for indoor use
- LocationIndoor
- ShapeRectangle
- Housing ColorWhite
- Housing MaterialMetal
- Voltage110V
- Watts100 watts
- Motion detection up to 8 metres covers large indoor areas
- Adjustable sensor head rotates 160° horizontally and vertically for precise aiming
- Fits standard E26 and E27 bulbs up to 100W for easy retrofitting
- Adjustable time delay from 5 seconds to 8 minutes suits any room
- Lux control switches between day-and-night or night-only operation
Baldwin E26/E27 Motion Sensor Adapter
The Baldwin motion sensor light socket converts any standard E26 or E27 bulb holder into an automatic lighting control. It fits directly into an existing indoor fixture and accepts screw-in bulbs up to 100 watts. The unit operates on 110 to 240 volt AC power at 50 or 60 hertz. No wiring or tools are required for installation.
Ideal for hands-free lighting in utility spaces
This adapter suits homeowners wanting automatic illumination in laundry rooms, basements, garages, stairwells and corridors where a switch is inconvenient. The sensor head tilts 160 degrees horizontally and vertically to cover the desired zone. It is not for outdoor use, damp locations or fixtures exceeding the 100 watt limit. Buyers needing dimming, smart-home integration or weatherproof construction should look elsewhere.
Adjustable timing and ambient-light thresholds
The time-delay runs from a minimum of 5 seconds up to 8 minutes, set via the Time knob. The Lux control switches between day-and-night operation at the Sun position or night-only at the Moon position, adjustable across a 2 to 2000 lux range. Detection reaches 8 metres maximum when mounted between 1.8 and 2.5 metres high. Sensitivity rarely needs adjustment but can be lowered if the lamp stays on constantly.
Highlights
- Motion detection up to 8 metres covers large indoor areas
- Adjustable sensor head rotates 160° horizontally and vertically for precise aiming
- Fits standard E26 and E27 bulbs up to 100W for easy retrofitting
- Adjustable time delay from 5 seconds to 8 minutes suits any room
- Lux control switches between day-and-night or night-only operation
Specifications
| Brand | Baldwin |
|---|---|
| Location | Indoor |
| Shape | Rectangle |
| Housing Color | White |
| Housing Material | Metal |
| Voltage | 110V |
| Watts | 100 watts |
| Part Number | TGGLSE27ASH2 |
Questions about this item
What type of light bulb base does the Baldwin E26/E27 Motion Sensor Light Socket accept?
It accepts standard E26 and E27 screw-in bulbs up to 100 watts.
Can the sensor head be aimed away from the fixed socket direction?
Yes, the sensor head adjusts 160 degrees left-to-right and 160 degrees front-to-back for precise aiming.
How do I confirm the Lux control is set for night-only operation?
Turn the LUX knob to the Moon position; the light will then activate only when ambient light falls below the set threshold.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
