Baldwin COB-USB2M COB LED Strip 6.56ft 6000K USB Dimmer
A 6.56 ft USB-powered COB LED strip delivers 6000 K white light with 300 LEDs per metre and a 10-level dimmer for adjustable, shadow-free illumination
- ShapeRectangle
- Housing ColorWhite
- Color Temperature6000 kelvin
- Temperature Range6000 kelvin
- Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
- USB powered by any 5 V 2 A port
- 10-level dimmer switch for precise brightness
- 300 LEDs per metre in compact COB form
- Strong self-adhesive backing for quick mounting
- 56 ft strip at 6000 K daylight white
Compact USB COB strip for accent lighting
The Baldwin COB-USB2M is a 6.56 ft COB LED strip that runs from any 5 V USB port supplying 2 A. It produces 6000 K white light at 300 LEDs per metre and includes a dimmer with 10 brightness levels and an on/off switch. Strong self-adhesive backing allows quick mounting on clean, dry surfaces such as cabinets, shelves or TV backs.
Suits plug-and-play ambient installs
This strip suits users who want a simple USB-powered accent light with adjustable brightness and no separate driver. It is not for buyers who need a hard-wired mains connection, runs longer than 6.56 ft without additional strips, colour-changing capability, or waterproofing for outdoor or wet locations.
6000 K colour temperature decides fit
The single specification that determines suitability is the fixed 6000 K colour temperature. If the project requires warmer or cooler white, or selectable CCT, this strip will not match the desired look.
Highlights
- USB powered by any 5 V 2 A port
- 10-level dimmer switch for precise brightness
- 300 LEDs per metre in compact COB form
- Strong self-adhesive backing for quick mounting
- 56 ft strip at 6000 K daylight white
Specifications
| Brand | Baldwin |
|---|---|
| Shape | Rectangle |
| Housing Color | White |
| Color Temperature | 6000 kelvin |
| Temperature Range | 6000 kelvin |
| Compatibility/Fitment | Out-Opening, Narrow Stile, Store Front Doors |
| Part Number | COB-USB2M |
Questions about this item
What USB power standard does the strip require to run at full brightness?
It needs a USB port or charger that can deliver 5 V at 2 A; lower-current ports may limit the 300 LEDs per metre to reduced output.
What surface preparation and width should I allow for the 8 mm wide strip?
Clean the mounting area until it is dry and dust-free, then press the full length of the 8 mm wide adhesive-backed strip firmly in place.
Where exactly can I cut the 6.56 ft strip without damaging the circuit?
Cut only at the marked solder pads spaced along the strip; cutting elsewhere will break the electrical path and leave the remaining section dead.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
