Baldwin 47686 Long Keyless Black Phenolic Socket E26 660W
Medium-base phenolic socket rated 660 watts at 250 volts with a threaded 1/8 IP cap and included shade ring
- TypeLED Light Fixtures
- LocationIndoor
- Housing Colorblack
- Housing MaterialPlastic
- Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
- Voltage110V
- Medium-base phenolic socket rated 660 W / 250 V for safe high-wattage use
- UL and CSA listed for verified safety compliance
- 1/8 IP threaded bottom cap accepts standard rod or nipple mounting
- Four-piece construction with shade ring simplifies installation and lamp securing
- Keyless on-off interior with screw terminals provides reliable switching without a pull chain
Baldwin 47686 Phenolic Socket E26
This Baldwin 47686 is a medium-base phenolic lamp holder rated for 660 watts at 250 volts. It uses a standard E26 interface and a keyless on-off interior with screw terminals. The black plastic housing suits indoor fixtures. It is UL and CSA listed for safety compliance.
Sustained Load Behaviour
The socket carries its full 660-watt rating continuously without derating. Phenolic construction resists heat from prolonged operation at 110-volt supply. The screw terminals maintain secure contact under constant current. No active cooling is required for the passive component.
Pre-Order Checks
Verify the fixture accepts a 1/8 IP threaded nipple for the bottom cap. Confirm the shade ring dimensions match the intended shade. Ensure the wiring uses screw-terminal connections compatible with the interior. The keyless design needs an external switch on the circuit.
Highlights
- Medium-base phenolic socket rated 660 W / 250 V for safe high-wattage use
- UL and CSA listed for verified safety compliance
- 1/8 IP threaded bottom cap accepts standard rod or nipple mounting
- Four-piece construction with shade ring simplifies installation and lamp securing
- Keyless on-off interior with screw terminals provides reliable switching without a pull chain
Specifications
| Brand | Baldwin |
|---|---|
| Type | LED Light Fixtures |
| Location | Indoor |
| Housing Color | black |
| Housing Material | Plastic |
| Compatibility/Fitment | Out-Opening, Narrow Stile, Store Front Doors |
| Voltage | 110V |
| Watts | 660 watts |
| Part Number | 47686 |
Questions about this item
How much heat does the 660 W phenolic socket generate when left on all day?
The socket itself produces minimal heat; warmth comes from the lamp installed in it. It is rated for 660 W at 250 V, so the bulb must not exceed that limit.
What mounting hardware is needed to install the 1/8 IP threaded bottom cap?
You need a 1/8 IP rod or nipple to thread into the bottom cap, plus wire for the screw terminals on the interior.
Will the E26 base accept the older incandescent bulbs I already own?
Yes, the medium E26 base fits standard incandescent, LED and CFL lamps up to the 660 W / 250 V rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
