We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White three-head LED flood light with adjustable heads and motion sensor, rectangular aluminium housing, 14 by 10 by 5 inches

Baldwin 38W 4200LM E26 5500K IP65 3-Head Motion Flood Light White

SKU CH-P4YK-TM0CV

A 38 W LED flood light delivers 4200 lumens at 5500 K with a 72 ft motion range and IP65 waterproof rating

  • TypeFluorescent Lamp Sleeves
  • Watts38 watts
  • Size/Dimensions14 in x 10 in x 5.2 in
  • Initial Lumens4200 lumens
  • Mean Lumens4200.00 lumen
  • ANSI Basee26
  • Bright 4200 lumen output from only 38 watts
  • Motion detection reaches 72 feet across 180 degrees
  • Three heads and sensor adjust to any angle
  • Aluminium housing gives strength and heat dissipation
  • IP65 rating withstands rain, sleet and snow

Three-head adjustable flood light

The Baldwin 38 W LED security fixture delivers 4200 lumens at 5500 K cool white from three independently aimable heads. An E26 base and standard 14 in x 10 in x 5.2 in housing mount to a four-inch junction box for wall installation on porches, garages, driveways and walkways. A 180-degree motion sensor detects movement up to 72 feet and triggers illumination for one, five or ten minutes.

Passive aluminum cooling and IP65 sealing

The aluminum body acts as a heatsink, dissipating the 38 W load without fans or audible noise. IP65 rating protects the electronics against rain, sleet and snow so output remains stable in wet conditions. Hard-wired AC operation eliminates battery maintenance and the LED array claims over 80 % energy savings versus a 175 W traditional equivalent.

Wiring and mounting requirements

Installation requires a three-wire mains connection to a standard four-inch junction box; no battery or solar option is supported. The adjustable heads and sensor pivot to cover wide areas without blind spots, freeing the installer from aiming a single fixed beam. One-year parts and labor coverage is included.

Highlights

  • Bright 4200 lumen output from only 38 watts
  • Motion detection reaches 72 feet across 180 degrees
  • Three heads and sensor adjust to any angle
  • Aluminium housing gives strength and heat dissipation
  • IP65 rating withstands rain, sleet and snow

Specifications

TypeFluorescent Lamp Sleeves
BrandBaldwin
Watts38 watts
Size/Dimensions14 in x 10 in x 5.2 in
Initial Lumens4200 lumens
Mean Lumens4200.00 lumen
ANSI Basee26
Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
Length14.05 L x 5.38 W x 8.24 H inches, 14 L x 10 W x 5.2 H inches, Standard
Base Typee26
Lamp ToneCool
Color Temperature5500 kelvin
Light ColorWhite
Parts1 Year
Labor1 Year
Part Number005-SL-n934AC-WH

Questions about this item

How do I wire the three heads and sensor to my junction box, and which step is often missed?

Connect the three supply wires — hot, neutral and ground — to the matching leads inside a 4-inch junction box; the step many skip is securing the ground wire to the box’s green screw before tightening the fixture.

Which components will need replacement first, and how long are they covered?

The LED arrays and PIR sensor are sealed units rated for long life; the manufacturer covers parts and labor for one year, after which any failed module would require full fixture replacement.

What limits continuous operation when the sensor keeps re-triggering?

The adjustable timer caps each activation at 1, 5 or 10 minutes maximum, so the light cannot stay on indefinitely even if motion persists.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.