Baldwin 32W 3500lm LED Flood Light 5000K IP65 Black
Hardwired 32 W LED flood light delivers 3500 lumens at 5000 K with IP65 protection, 180 ° motion sensor up to 69 ft and four selectable modes
- TypeFluorescent Lamp Sleeves
- Watts32 watts
- Size/Dimensions9.21 in x 6.18 in x 6.5 in
- Initial Lumens3500 lumens
- Mean Lumens3500.00 lumen
- ANSI Basee26
- 32 W LED delivers 3500 lm at 5000 K daylight
- 180° motion sensor detects movement up to 69 ft
- Four selectable modes including dusk-to-dawn and manual override
- IP65 aluminium housing withstands rain and dust outdoors
- ETL listed for 120 V hardwired installation
Outdoor LED Flood Light
The Baldwin 32 W LED flood light delivers 3500 lumens of 5000 K daylight white output while drawing only 32 watts. It is designed for hardwired installation on garage walls, yard posts or porch ceilings where a motion-activated security light is required. The fixture replaces a 150 W halogen equivalent and carries an ETL listing for North American safety compliance.
Aluminium housing with IP65 rating
The main body uses aluminium with a polycarbonate lens, sealed to IP65 for waterproof performance in rain and snow. An adjustable head rotates to aim the 180-degree detection zone up to 69 ft, and the unit mounts on a standard 4.13 in junction box. Four operating modes — Test, Security, Dusk-to-Dawn and Manual Override — are selected via the wall switch and onboard controls.
Check voltage and wiring before ordering
The fixture operates on 120 V AC (110 V–130 V) and must be hardwired; no plug or battery option exists. Verify that the mounting location provides a 4.13 in junction box and that the recommended 8.2 ft installation height suits the area. Buyers needing a plug-in, solar-powered or lower-voltage solution should look elsewhere.
Highlights
- 32 W LED delivers 3500 lm at 5000 K daylight
- 180° motion sensor detects movement up to 69 ft
- Four selectable modes including dusk-to-dawn and manual override
- IP65 aluminium housing withstands rain and dust outdoors
- ETL listed for 120 V hardwired installation
Specifications
| Type | Fluorescent Lamp Sleeves |
|---|---|
| Brand | Baldwin |
| Watts | 32 watts |
| Size/Dimensions | 9.21 in x 6.18 in x 6.5 in |
| Initial Lumens | 3500 lumens |
| Mean Lumens | 3500.00 lumen |
| ANSI Base | e26 |
| Compatibility/Fitment | Out-Opening, Narrow Stile, Store Front Doors |
| Length | 6.88 L x 7.08 W x 7.67 H inches, 9.21 L x 6.18 W x 6.5 H inches, 1 Pack |
| Base Type | e26 |
| Lamp Tone | Cool |
| Color Temperature | 5000 kelvin |
| Features | Widely Use |
| Light Color | White |
| Parts | 1 Year |
| Labor | 1 Year |
| Part Number | tynbdgjpl-004 |
Questions about this item
What voltage and wiring method does the 32W LED flood light require?
It runs on AC 120V (110V-130V) and must be hardwired to a junction box.
What size junction box is needed for the 4.13" base?
The fixture works with a standard 4.13" x 4.13" junction box for secure mounting.
How do you activate the manual override mode on this flood light?
Flip the wall switch OFF-ON-OFF-ON within three seconds to keep the light on constantly for a selected period.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
GE Lighting
GE Lighting 28885 T8 Linear Fluorescent Light Bulb 24 inch 17W 5000K Coverguard 6 pack
$29.99
0.00035553BTC
In stock
GE
GE 61362 Fluorescent T5 46 inch 54W 5000K G5 base accessory
- Fluorescent Tube
$140.99
0.00167143BTC
In stock