Baldwin 30W LED Work Light 6500lm 5000K IP67 10ft Cord Stand
A 30W LED flood light delivers 6500 lumens of 5000K daylight with a 120° beam, IP67 waterproof housing, 10 ft cord and adjustable stand
- TypeFluorescent Lamp Sleeves
- Watts30 watts
- Size/Dimensions10.23 in x 3.93 in x 9.45 in
- Initial Lumens6500 lumens
- Mean Lumens6500 lumen
- Length10.23 L x 3.93 W x 9.45 H inches, Work Light - Stand
- 6500 lumens from 96 LED chips illuminate 3000 sq ft with 120° beam
- IP67 waterproof die-cast aluminum housing survives 3M drop test with PC lens
- 10 ft cord with switch plugs straight in — no wiring needed
- 360° horizontal and 270° vertical rotation directs light exactly where required
- 10KV surge protection keeps output stable near heavy tools and lightning surges
Portable 30W 6500lm Work Light
This Baldwin LED work light produces 6500 lumens of 5000K daylight-white output from a 30-watt fixture. The unit mounts on an included stand and runs on 85-277V mains power via a 10-foot cord with an integrated switch. An IP67 rating and die-cast aluminium housing make it suitable for wet or dusty job sites.
Suited for mobile task lighting not fixed installs
The adjustable head rotates 360° horizontally and tilts 270° vertically, letting crews aim light across up to 3000 square feet without repositioning the base. It is not intended for buyers who need permanent ceiling-mounted fixtures, battery-only operation, or a motion-sensor trigger.
Sustained output with surge protection
A built-in voltage regulation circuit and 10KV surge protection keep output stable when heavy tools cycle on the same circuit. The aluminium body and thickened PC lens dissipate heat continuously during long shifts, maintaining the 120° beam without flicker or thermal throttling.
Highlights
- 6500 lumens from 96 LED chips illuminate 3000 sq ft with 120° beam
- IP67 waterproof die-cast aluminum housing survives 3M drop test with PC lens
- 10 ft cord with switch plugs straight in — no wiring needed
- 360° horizontal and 270° vertical rotation directs light exactly where required
- 10KV surge protection keeps output stable near heavy tools and lightning surges
Specifications
| Type | Fluorescent Lamp Sleeves |
|---|---|
| Brand | Baldwin |
| Watts | 30 watts |
| Size/Dimensions | 10.23 in x 3.93 in x 9.45 in |
| Initial Lumens | 6500 lumens |
| Mean Lumens | 6500 lumen |
| Length | 10.23 L x 3.93 W x 9.45 H inches, Work Light - Stand |
| Lamp Tone | Cool |
| Color Temperature | 5000 kelvin |
| Light Color | Daylight white |
| Parts | 1 Year |
| Labor | 1 Year |
| Part Number | FL-30W-GZD-MZ3D |
Questions about this item
What power source must I have available for this 85-277V work light to operate?
The light runs on standard AC mains between 85 and 277 volts and includes a 10 ft cord with plug, so any ordinary wall outlet or site power supply in that range will power it directly.
Will the 360° horizontal and 270° vertical adjustment let me aim the 6500 lumen beam alongside my existing tripod-mounted lights?
Yes, the stand-mounted head rotates a full 360° horizontally and tilts 270° vertically, letting you point the 120° flood beam precisely where needed without moving the base.
How can I confirm the IP67 rating is holding up after I set the light outdoors?
The housing is fully leak-tested at the factory; after setup, verify the lens and seals show no cracks, ensure the cord entry is tight, and the light should continue operating normally through rain or hose-down without water ingress.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
GE Lighting
GE Lighting 28885 T8 Linear Fluorescent Light Bulb 24 inch 17W 5000K Coverguard 6 pack
$29.99
0.00035654BTC
In stock
GE
GE 61362 Fluorescent T5 46 inch 54W 5000K G5 base accessory
- Fluorescent Tube
$140.99
0.0016762BTC
In stock