We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round white flush-mount ceiling light 8.7 inch diameter ultra thin profile with visible motion sensor

Baldwin 18 W 8.7 in Motion Sensor Ceiling Light 3000K/4000K/5000K

SKU CH-R5X7-ZM4V9

An 8.7 inch hard-wired ceiling light with a 120° PIR motion sensor, selectable 3000K, 4000K or 5000K colour temperature and 1800 lumen output

  • TypeFluorescent Lamp Sleeves
  • Watts18 watts
  • Size/Dimensions22 cm x 22 cm x 2.5 cm
  • Initial Lumens1800 lumens
  • Mean Lumens1800.00 lumen
  • Length8.7 L x 8.7 W x 0.98 H inches, 22 L x 22 W x 2.5 H centimete
  • Three selectable colour temperatures suit any room
  • 18 W LED delivers 1800 lumens of bright light
  • PIR sensor detects motion up to 10 ft across 120°
  • Ultra-thin 0.99 in profile fits low ceilings
  • Three operating modes: auto, always-on, motion-only

8.7 inch Motion Sensor Ceiling Light

The Baldwin 18 W flush mount fixture installs on ceilings or walls with a low 0.99 inch profile. Selectable 3000K, 4000K or 5000K colour temperature is set by a toggle switch before mounting. A built-in PIR sensor covers a 120° detection angle and 10 ft semi-diameter range at up to 11.5 ft mounting height.

Three Operating Modes for Continuous Use

Slide the switch beside the sensor to choose AUTO, ON or G mode. AUTO activates only when motion is detected in darkness, saving energy during daylight hours. G mode triggers on motion at any time, while ON provides constant illumination without sensor interaction. The non-dimmable 1800 lumen output remains steady in every mode.

Hard-Wired Non-Dimmable Fixture

This unit requires direct electrical wiring and offers no dimming capability. Buyers who need a plug-in or battery-powered light, or who require dimmable output, should select a different product. The 18 W LED delivers 1800 lumens at a fixed 4000 K mean colour temperature with a one-year parts and labour warranty.

Highlights

  • Three selectable colour temperatures suit any room
  • 18 W LED delivers 1800 lumens of bright light
  • PIR sensor detects motion up to 10 ft across 120°
  • Ultra-thin 0.99 in profile fits low ceilings
  • Three operating modes: auto, always-on, motion-only

Specifications

TypeFluorescent Lamp Sleeves
BrandBaldwin
Watts18 watts
Size/Dimensions22 cm x 22 cm x 2.5 cm
Initial Lumens1800 lumens
Mean Lumens1800.00 lumen
Length8.7 L x 8.7 W x 0.98 H inches, 22 L x 22 W x 2.5 H centimeters, 8.7inch-1pack
Lamp ToneCool
Color Temperature4000 kelvin
FeaturesWidely Use
Light ColorWarm/ Neutral/ Cool White
Parts1 Year
Labor1 Year
Part NumberLD-GB-028WM

Questions about this item

Does the 18 W flush-mount fixture run warm after hours of continuous use?

The LED panel draws 18 watts and measures 2.5 cm thick, so heat output stays low even when the light is left on for long periods.

What wiring must already be in place for the hard-wired 8.7 inch unit to operate?

A standard 120 V junction box with live, neutral and ground conductors is required; the fixture has no plug or battery backup.

Will the PIR sensor’s 120° detection angle and 10 ft range work reliably on a ceiling higher than 11.5 ft?

The manufacturer recommends a maximum mounting height of 11.5 ft; above that the 120° pattern and 10 ft semi-diameter coverage may miss movement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.