We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Warm white LED strip on reel with RF remote and power adapter

Baldwin 16.4ft 300 LED Warm White 3000K Strip Light

SKU CH-SX6F-ZXFW2

A 16.4ft warm-white LED strip with 300 LEDs at 3000 K delivers 1300 lumens from 12 W and includes an RF remote that works through walls up to 60 ft

  • TypeFluorescent Lamp Sleeves
  • Watts12 watts
  • Size/Dimensions16.4 feet
  • Initial Lumens1300.00 lumen
  • Mean Lumens1300.00 lumen
  • Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
  • True RF remote works through walls up to 60 ft
  • 300 LEDs deliver 1300 lumen warm white glow
  • Self-adhesive backing enables screw-free mounting on clean surfaces
  • 12 W ETL-listed adapter runs cool at DC 12 V
  • Cuttable every 3 LEDs with 0.31 in width for custom fits

What the strip delivers

This Baldwin strip is a 16.4 ft flexible tape with 300 LEDs producing warm white light at 3000 K. It draws 12 W and outputs 1300 lumen for kitchen, bedroom or under-cabinet ambience. The kit includes an ETL-listed 12 V DC power adaptor and an RF remote for dimming and timing.

Build and everyday connections

The tape is 0.31 in wide with a self-adhesive backing for screw-free mounting on clean, flat surfaces. A 4.9 ft power cord links the strip to the adaptor, and the RF controller sits inline. The remote works through walls up to 50-60 ft and can sync multiple kits together. The strip can be cut every three LEDs along marked lines; rejoining requires a separate 2-pin 8 mm connector.

Practical limits of the 12 V DC system

Operation is limited to the supplied 12 V DC adaptor, so the strip cannot be run directly from mains voltage. Total length is fixed at 16.4 ft per kit; extending beyond that needs additional power injection not provided. The RF link is one-way — the remote sends commands but receives no status feedback. Cutting the tape voids the sealed circuit unless the extra connector is sourced and fitted correctly.

Highlights

  • True RF remote works through walls up to 60 ft
  • 300 LEDs deliver 1300 lumen warm white glow
  • Self-adhesive backing enables screw-free mounting on clean surfaces
  • 12 W ETL-listed adapter runs cool at DC 12 V
  • Cuttable every 3 LEDs with 0.31 in width for custom fits

Specifications

TypeFluorescent Lamp Sleeves
BrandBaldwin
Watts12 watts
Size/Dimensions16.4 feet
Initial Lumens1300.00 lumen
Mean Lumens1300.00 lumen
Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
Length16.4 feet
Lamp ToneCool
Standards/CertificationsUL Listed/CSA Certified
Color Temperature3000 kelvin
FeaturesWidely Use
Light ColorWarm White
Parts1 Year
Labor1 Year
Part Numbereryuwkopsl1127p

Questions about this item

What voltage does the 12 W ETL Listed adapter supply to the strip?

The kit runs on DC 12 V, so the included 12 W ETL Listed adapter delivers 12 V to the 16.4 ft LED strip.

How wide is the 16.4 ft flexible tape and what surface preparation is needed?

The strip is 0.31 inch wide and uses a self-adhesive backing; mount it on a clean, even surface for reliable adhesion.

What is the pairing step that is often missed when setting up the RF remote?

After powering the strip, press the remote’s match button within a few seconds so the controller learns the 360-degree RF signal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.