We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and blue braided 1-to-5 PWM fan splitter cable, 15.7 inch

Bailink

Bailink 2026 PWM Fan Hub 1-to-5 Splitter 15.7 Inch Black/Blue

SKU CH-Q025-AC3YS

Connects five PWM or three-pin case fans to one motherboard header using a 15.7-inch sleeved cable

  • Cleaner cable routing with black and blue sleeved nylon braided wiring
  • PWM speed control across five fans from a single 4-pin motherboard header
  • Works with both 4-pin and 3-pin case fans for broad compatibility
  • 7 inch length gives flexible placement between board and fans
  • One 4-pin female to five 4-pin male connectors simplifies DIY builds

PWM Fan Hub for Desktop Builds

The Bailink 2026 PWM Fan Hub splits one motherboard header into five connections for case or CPU coolers. It accepts both 4-pin PWM and 3-pin DC fans so speed control works across mixed fan types. The 15.7-inch sleeved nylon braided cable keeps routing tidy inside the chassis. This hub suits builders who want cleaner cable management without adding a separate controller.

Check Motherboard Header and Fan Count

Verify that your board provides a single 4-pin PWM header with enough current for the combined draw of all attached fans. The splitter carries one 4-pin male plug to the board and five 4-pin female sockets for the fans. Each fan connector also fits 3-pin plugs, but speed reporting requires the fourth wire. Ensure the total fan power does not exceed the header rating.

Thermals Noise and Power in Normal Use

The hub itself draws negligible power and adds no active cooling or noise; thermal performance depends entirely on the fans connected. PWM signalling lets the motherboard regulate speeds based on temperature curves, so acoustics stay low at idle and ramp only under load. The braided sleeve protects wires from abrasion but does not change electrical resistance or heat output.

Highlights

  • Cleaner cable routing with black and blue sleeved nylon braided wiring
  • PWM speed control across five fans from a single 4-pin motherboard header
  • Works with both 4-pin and 3-pin case fans for broad compatibility
  • 7 inch length gives flexible placement between board and fans
  • One 4-pin female to five 4-pin male connectors simplifies DIY builds

Specifications

No published specifications for this item yet.

Questions about this item

Does the package include the fans themselves or just the splitter cable?

The box contains one 15.7 inch 1-to-5 PWM splitter cable with a 4-pin male connector and five 4-pin female connectors; fans are not included.

Should I pick the 15.7 inch or the shorter 10.6 inch version for a full-tower build?

The 15.7 inch length gives more routing room between the motherboard header and distant case fans, while the 10.6 inch version suits compact cases.

Will the hub let the motherboard control the speed of all five connected fans via PWM?

Yes, the 4-pin male plug carries the PWM signal to every female port, so the board can adjust each supported 3-pin or 4-pin fan together.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.