We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Baader Planetarium

Baader Planetarium SWIFT800 Pro SDI & HDMI Wireless Video Transmission Kit

SKU CH-QGMN-GXY4V

Wireless video kit sends 1080p60 signals up to 800 ft with 70 ms latency, dual SDI outputs, HDMI I/O and 25 Mbps bit-rate for multi-screen monitoring

  • Up to 800 ft transmission range for flexible on-set positioning
  • Ultra-low 70 ms latency keeps monitoring in sync with live action
  • 1080p60 Hz support with 25 Mbps bit-rate for sharp detail
  • Dual SDI and HDMI interfaces enable multi-screen monitoring workflows
  • Up to four smartphones or tablets connect for remote viewing

Wireless video kit for film and TV

The SWIFT800 Pro transmits SDI and HDMI signals up to 800ft with latency of 70ms at maximum. It supports resolutions up to 1080p60Hz and a 25Mbps code rate, a 66% improvement over the first generation. Dual SDI outputs on the receiver enable multi-screen monitoring for professional crews.

Suited for live streaming

The transmitter accepts SDI input, SDI loop output and HDMI input while the receiver provides dual SDI and HDMI outputs. Up to four smartphones or tablets can connect for app-based monitoring and recording. Builders who need 4K resolution or longer range than 800ft should look at other systems.

Sustained operation with flexible power

Three power options — DC, Sony NP-F battery slot and power bank — keep the kit running during extended shoots. The smart OLED screen reports battery level, fan status, resolution, signal strength, work mode and frequency points, and it warns when battery runs low. This monitoring helps maintain stable 25Mbps transmission over long takes.

Highlights

  • Up to 800 ft transmission range for flexible on-set positioning
  • Ultra-low 70 ms latency keeps monitoring in sync with live action
  • 1080p60 Hz support with 25 Mbps bit-rate for sharp detail
  • Dual SDI and HDMI interfaces enable multi-screen monitoring workflows
  • Up to four smartphones or tablets connect for remote viewing

Specifications

No published specifications for this item yet.

Questions about this item

Does the transmitter need SDI or HDMI sources to operate?

Yes, it accepts SDI input with loop-out and HDMI input, so a camera or switcher with either interface is required.

Can the receiver feed legacy SDI monitors alongside an HDMI display?

The receiver provides dual SDI outputs and one HDMI output, allowing simultaneous connection to older SDI screens and a modern HDMI monitor.

How do I confirm the 70 ms latency and 25 Mbps bit-rate are active?

The transmitter’s OLED screen shows real-time resolution, signal strength, frequency point and code rate, letting you verify the link is running at the specified performance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.