We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White circular solar filter with adjustable clamp and safety straps

Baader Planetarium

Baader Planetarium 80mm AstroSolar Binocular Filter OD 5.0 85-126mm Clamp

SKU CH-ZFZ9-MQHF7

Solar filter for 80 mm binoculars with OD 5.0 film and 85–126 mm clamp range

  • Safe visual solar observation with AstroSolar Safety Film OD 5.0
  • White-light sunspot detail revealed by precise optical density 5.0
  • Fits binoculars with outer diameter 85-100mm and inner diameter 111-126mm
  • Three safety straps with glue-pads prevent accidental detachment
  • Stress-free mounted film retains diffraction-limited optical quality

Solar Binocular Filter for Visual Observation

The Baader Planetarium AstroSolar Binocular Filter mounts on binoculars with an 80mm aperture to enable safe white-light solar viewing. Optical density 5.0 film reveals sunspots and surface detail while protecting the observer's eyes. It is intended for astronomers and hobbyists who want a ready-mounted filter rather than a DIY sheet. The stress-free cell preserves the film's diffraction-limited performance at high magnification.

Thermals Noise and Power Draw

The filter is a passive optical component with no electronics, so it generates no heat, produces no noise and draws no power during use. Image quality remains stable because the AstroSolar film is held without tension, avoiding the distortion that occurs when material is stretched like a drumhead. No active cooling or power supply is required for normal solar observation sessions.

Build Fit and Clearance

The clamp fits binoculars with an outer diameter of 85-100mm and an inner diameter of 111-126mm, secured by the included centering bolts. Three safety straps with glue-pads add a secondary attachment to prevent accidental detachment while observing. Buyers whose binoculars fall outside these diameter ranges cannot use this filter, and those needing a filter for photographic equipment must choose a different model.

Highlights

  • Safe visual solar observation with AstroSolar Safety Film OD 5.0
  • White-light sunspot detail revealed by precise optical density 5.0
  • Fits binoculars with outer diameter 85-100mm and inner diameter 111-126mm
  • Three safety straps with glue-pads prevent accidental detachment
  • Stress-free mounted film retains diffraction-limited optical quality

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the Baader 80mm AstroSolar filter on my binoculars and which step is most often done incorrectly?

Loosen the cell, slide it over the objectives so the clamping range of 85-100mm or 111-126mm matches your barrels, tighten the centering bolts evenly, then attach the three safety straps with their glue-pads; the step most often missed is securing all three straps before observing.

What maintenance or replacement will this filter need over time?

The AstroSolar Safety Film OD 5.0 should be inspected before every session for punctures, creases or coating degradation; replace the entire filter cell if the film shows any damage, as the film cannot be serviced separately.

What is the first limit that appears during sustained solar viewing with this filter?

The optical density of 5.0 is rated for visual use only; prolonged imaging or extended high-magnification sessions can exceed the film's thermal capacity, so limit continuous viewing and allow the cell to cool between sessions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.