We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver cylindrical 5-inch midrange driver with black cone and metal basket

B&C Speakers

B&C Speakers 5" ND Sealed Mid 220W handheld pcs accessory

SKU CH-Y1Z3-GJPZ2

A 5-inch sealed midrange driver delivering 220 W continuous program power with 99 dB sensitivity and 300–3500 Hz response for low-distortion pro audio

  • 220 W program power handles demanding midrange duties
  • 99 dB sensitivity produces high output with modest amplifier power
  • 300–3500 Hz range focuses energy on critical vocal frequencies
  • 38 mm aluminium voice coil on glass-fibre former reduces distortion
  • Waterproof cone treatment protects the driver in exposed installations

5-inch Neodymium Midrange Driver

The B&C Speakers 5" ND Sealed Mid handles 220 W continuous program power with a 38 mm aluminium voice coil. Its neodymium motor delivers 99 dB sensitivity across a 300–3500 Hz range. The waterproof-treated cone and sealed chassis suit direct-radiation or horn-loaded midrange applications in pro audio or vehicle installations.

Installers Needing Compact High-Output Midrange

This driver suits builders who need a lightweight 127 mm unit with extremely low distortion for tight enclosures. Buyers requiring extended bass below 300 Hz or wider dispersion above 3.5 kHz should look at dedicated woofers or compression drivers instead.

Verify Mounting Cutout and Impedance Match

Confirm your baffle cutout accommodates the 122 mm diameter and 108 mm overall depth. The 8 Ω nominal impedance and 110 W continuous power handling must match your crossover design and amplifier capabilities for safe operation.

Highlights

  • 220 W program power handles demanding midrange duties
  • 99 dB sensitivity produces high output with modest amplifier power
  • 300–3500 Hz range focuses energy on critical vocal frequencies
  • 38 mm aluminium voice coil on glass-fibre former reduces distortion
  • Waterproof cone treatment protects the driver in exposed installations

Specifications

No published specifications for this item yet.

Questions about this item

What amplifier impedance rating do I need for the 8 ohm nominal impedance driver?

Use an amplifier rated for 8 ohm loads; the driver's minimum impedance is 6.3 ohms so the amp must stay stable down to that level.

Will the 122 mm baffle cutout fit the existing opening in my motorcycle fairing?

The cutout diameter is 122 mm; measure your current opening and compare it to this figure before ordering.

How can I verify the midrange is performing correctly after installation?

Play a 1 kHz test tone at 1 W and measure 99 dB SPL at 1 m; the response should stay smooth between 300 Hz and 3500 Hz.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.