We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

B/A Products Co.

B/A Products Co. 6I-SW4T Snatch Block, Wire Rope, 1/2 in, 8000 lb

SKU CH-AKH6-DYNG3

Snatch block with swivel pulley accepts 3/8 in or 1/2 in wire rope and handles an 8000 lb working load limit

  • Rated for 8000 lb working load limit
  • Swivel shackle prevents rope twist under tension
  • Sleeve bearing keeps sheave turning smoothly
  • Accepts 3/8 in and 1/2 in wire rope
  • Painted finish resists corrosion in harsh environments

8,000 lb Wire-Rope Snatch Block

This B/A Products Co. snatch block is a swivel-type pulley built for lifting and pulling with wire rope. It accepts 3/8 in and 1/2 in diameter cable and attaches via a shackle. The unit is intended for rigging professionals and recovery operators who need a single-sheave redirect or mechanical advantage.

Working Load Limit and Cable Fit

The block carries a working load limit of 8,000 lb and is rated only for the two wire-rope sizes listed. Exceeding that load or using larger-diameter cable would surpass the design envelope. The sleeve bearing and painted finish suit general-purpose rigging but do not extend the stated capacity.

4 1/2 in Sheave Diameter

The sheave outside diameter measures 4 1/2 in, which determines the minimum bend radius for the wire rope. A smaller sheave would increase rope fatigue; a larger one would change the block’s profile. Select this part when the application requires exactly this sheave size and the 8,000 lb rating.

Highlights

  • Rated for 8000 lb working load limit
  • Swivel shackle prevents rope twist under tension
  • Sleeve bearing keeps sheave turning smoothly
  • Accepts 3/8 in and 1/2 in wire rope
  • Painted finish resists corrosion in harsh environments

Specifications

BrandB/A PRODUCTS CO

Questions about this item

Should I choose a snatch block rated for 1/2 in wire rope or a different capacity?

This block is built for 3/8 in and 1/2 in wire rope, so select it when your line falls in that range.

What does the 8,000 lb working load limit mean when I rig it in the field?

It is the maximum load the block can handle in straight lifting; do not exceed 8000 lb.

How does the swivel shackle attachment affect the angles I can pull at?

The swivel shackle lets the block rotate under load, reducing twist on the wire rope during angled pulls.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.