We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

AZDOME

AZDOME JYX05 Hardwire Kit USB Type C 11.5ft car electronics accessory

SKU CH-9DNC-WE01F

Converts 12V-24V vehicle power to 5V/2.5A USB Type C for continuous dash cam operation with low voltage cut-off at 11.8V or 23.6V

  • TypeRearview Monitor
  • Enables 24-hour parking surveillance with continuous fuse-box power
  • Converts 12-24 V vehicle supply to 5 V 2.5 A USB-C output
  • Smart cut-off at 11.8 V or 23.6 V preserves starter battery
  • 5 ft cable reaches fuse box from any dash position
  • Built-in overtemperature, reverse, short-circuit and overload protection

AZDOME JYX05 Hardwire Kit 11.5 ft

This AZDOME JYX05 hardwire kit converts a vehicle 12 V to 24 V supply into a stable 5 V 2.5 A USB Type C output for compatible dash cameras. The 11.5 ft cable reaches from the fuse box to the camera mounting point with an input lead of 0.8 m and an output lead of 2.7 m. Built‑in protection circuits guard against reverse connection, short circuit, overload and overtemperature, cutting power if the circuit exceeds 130 and restoring it at 90. Low‑voltage protection disconnects the kit at 11.8 V or 23.6 V after 60 s to preserve starting power.

Suited for parking‑mode dash cams.

Drivers who want 24‑hour parking surveillance on an AZDOME M27, M330, PG16S‑3CH, M580, M560‑3CH or PG19X dash cam will benefit from the constant BAT+ and ACC‑switched wiring. The kit is designed only for cameras that accept 5 V 2.5 A through a USB Type C port, so vehicles without a suitable fuse tap location or owners of dash cams using barrel or Micro‑USB connectors cannot use it. Installers who prefer a simpler cigarette‑lighter adapter should look elsewhere.

5 V 2.5 A USB Type C output decides fit

The single specification that determines compatibility is the 5 V 2.5 A USB Type C output; the dash camera must match this exact voltage, current and connector type. Input tolerance of 12 V to 24 V covers cars, trucks, SUVs and big rigs, while the 11.5 ft length suits most cabin routings. If the camera requires a different voltage, a higher amperage or another connector, this hardwire kit will not power it correctly.

Highlights

  • Enables 24-hour parking surveillance with continuous fuse-box power
  • Converts 12-24 V vehicle supply to 5 V 2.5 A USB-C output
  • Smart cut-off at 11.8 V or 23.6 V preserves starter battery
  • 5 ft cable reaches fuse box from any dash position
  • Built-in overtemperature, reverse, short-circuit and overload protection

Specifications

TypeRearview Monitor

Questions about this item

How do I confirm the JYX05 is working after connecting it to my fuse box?

The dash cam should power on and enter parking mode when the ignition is off. The kit converts 12-24V input to 5V/2.5A output via the USB Type C plug. If battery voltage drops to 11.8V or 23.6V, the kit cuts power after 60 seconds to protect starting ability.

What comes in the box and what must I buy separately?

The kit includes the hardwire cable (11.5 ft total: 0.8 m input, 2.7 m output) with a USB Type C connector, RED wire (BAT+) for constant fuse, and YELLOW wire (ACC) for ACC fuse. Fuse taps and add-a-circuit adapters are not included and must be purchased separately for your fuse box.

Which AZDOME dash cam models does this JYX05 kit support?

This kit is compatible with AZDOME M27, M330, PG16S-3CH, M580, M560-3CH, and PG19X dash cams that use a USB Type C port and require 5V/2.5A input. It accepts 12-24V vehicle systems for cars, trucks, SUVs, and big rigs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.