AYAGROUP
AYAGROUP AYA-241810-SEA 24(20+4)-Pin to 18-Pin + 10-Pin internal power cable
Connects a 24-pin ATX supply to 18-pin and 10-pin Seasonic modular headers using 60 cm UL 1007 18AWG sleeved cable
- TypeCable Kits
- Length2 ft.
- Cable Length2 ft.
- Connector A24-Pin (20+4-Pin)
- Connector B18-Pin + 10-Pin
- Connector Number3
- 24-inch length reaches distant motherboard headers
- 24-pin to 18+10-pin split fits Seasonic modular PSUs
- UL 1007 18AWG conductors handle high current safely
- Black protective sleeves shield wires from abrasion
- Male-to-male terminals plug directly into PSU and board
Compatible Seasonic Extension Cable
This AYAGROUP AYA-241810-SEA cable kit connects a Seasonic modular power supply to a standard ATX motherboard. It converts the PSU-side 18-pin and 10-pin headers into a single 24-pin (20+4) connector. The 60 cm length suits typical mid-tower builds using listed Seasonic units.
UL 1007 18AWG Construction
Each lead uses UL 1007 rated 18 AWG wire covered in black protective sleeves. The male-to-male terminals lock into the PSU modular board and the motherboard socket without adapters. Three connectors in total reduce cable clutter compared to running separate extensions.
Check PSU Model Before Ordering
Verify your exact Seasonic model appears in the supported list: M12II Evo 520, 620, 650, 750, 850; X-650 KM3, X-750 KM3, X-850 KM3, X-1050XM2, X-1250XM2; SS-660XP2, SS-760XP2, SS-860XP2, SS-1050XP3, SS-1200XP3; Snow Silent 750, 1050; Focus Plus Gold 550, 650, 750, 850; Focus Plus Platinum 550, 650, 750, 850. Builders with other PSU brands or unlisted Seasonic series cannot use this cable.
Highlights
- 24-inch length reaches distant motherboard headers
- 24-pin to 18+10-pin split fits Seasonic modular PSUs
- UL 1007 18AWG conductors handle high current safely
- Black protective sleeves shield wires from abrasion
- Male-to-male terminals plug directly into PSU and board
Specifications
| Brand | AYAGROUP |
|---|---|
| Model | AYA-241810-SEA |
| Type | Cable Kits |
| Length | 2 ft. |
| Cable Length | 2 ft. |
| Connector A | 24-Pin (20+4-Pin) |
| Connector B | 18-Pin + 10-Pin |
| Connector Number | 3 |
| Terminal Gender | Male to Male |
Questions about this item
Does the 24(20+4)-Pin ATX connector on this cable support the full 24-pin motherboard power requirement?
Yes, the 24(20+4)-Pin connector provides the complete ATX 24-pin interface for motherboard power delivery.
What clearance is needed to route the 24-inch sleeved cable with its 18-pin and 10-pin connectors?
The cable is 24 inches long with black protective sleeves, requiring enough space to bend and route from the PSU to the motherboard.
How do I correctly align the 18-pin and 10-pin plugs into the Seasonic modular PSU sockets?
Match each keyed connector to its corresponding port on the Seasonic PSU; the 18-pin and 10-pin plugs only fit one way.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



