We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black plastic box with multiple wire connectors and a USB port

Axxess Technologies

Axxess Technologies AXTO-MI1 amp data interface car electronics accessory

SKU CH-A180-W8MZM

Retains the OEM Rockford Fosgate amplifier while adding navigation outputs and eliminating COM errors in select Mitsubishi models from 2006 to 2012

  • TypeWire Harness
  • Retains the factory Rockford Fosgate amplifier
  • Supplies navigation outputs for parking brake, reverse, mute and speed sense
  • Removes COM error messages after installation
  • Adjustable input gain matches aftermarket signal levels
  • Firmware updates via USB connection

Vehicle-Specific Amp Interface

The Axxess AXTO-MI1 data interface connects an aftermarket amplifier to select Mitsubishi vehicles from 2006 to 2012. It is designed for owners of the Eclipse, Endeavour and Galant who want to upgrade their sound system without losing the factory Rockford Fosgate amplifier. The module supplies the necessary data signals so the new amp communicates correctly with the car's original wiring.

Plug-and-Play Installation

The harness plugs directly between the factory wiring and the aftermarket amplifier, so no cutting or splicing of the original loom is required. Adjustable input gain lets you match signal levels during the first power-up, preventing distortion or low output. A USB port allows firmware updates if a compatibility issue appears after installation. The most common problem is a COM error message on the dash, which this interface is built to eliminate.

Pre-Purchase Compatibility Check

Verify that your Mitsubishi is an Eclipse 2006-2012, Endeavour 2007-2011 or Galant 2007-2012 equipped with the OEM Rockford Fosgate system. Confirm the vehicle provides the parking brake, reverse, mute and speed-sense outputs that the interface passes through to a navigation unit. Buyers without the factory amplified system or with a different model year cannot use this interface.

Highlights

  • Retains the factory Rockford Fosgate amplifier
  • Supplies navigation outputs for parking brake, reverse, mute and speed sense
  • Removes COM error messages after installation
  • Adjustable input gain matches aftermarket signal levels
  • Firmware updates via USB connection

Specifications

TypeWire Harness

Questions about this item

How can I confirm the AXTO-MI1 is functioning correctly after installation in my 2007 Endeavour?

The OEM Rockford Fosgate system should play audio without a COM error on the display, and the navigation outputs for parking brake, reverse, mute and speed sense must be active.

What components are included with the AXTO-MI1 and what extra items are required for a 2011 Galant install?

The interface module and its wiring harness are supplied; a compatible aftermarket head unit and any vehicle-specific dash kit or antenna adapter must be purchased separately.

Which AXTO-MI1 version should I select for a 2006 Eclipse versus a 2012 Galant?

A single version covers all listed models — 2006-2012 Eclipse, 2007-2011 Endeavour and 2007-2012 Galant — so no alternative capacity or revision exists to choose between.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.