Axxess Technologies
Axxess AXLOC-CH3 2 Channel LOC Line Output Converter car electronics accessory
Two-channel line output converter adds an amplifier to select Chrysler and Dodge vehicles from 2011 to 2020 with adjustable gain and signal-sensing remote turn-on
- TypeLine Output Converter
- Two-channel low-level output adds an amplifier
- Gain Controller adjusts overall output level
- Signal-sense remote wire activates at 12 V 500 mA
- 55-watts per channel drives speakers or subwoofer
- Fits Chrysler 300 2011-2014 and Dodge Charger Journey 2011-2020
Two-Channel Line Output Converter
The Axxess AXLOC-CH3 converts factory speaker-level signals into two channels of low-level RCA output for Chrysler and Dodge models from 2011 to 2020. It enables owners of the 300, Charger or Journey to add an aftermarket amplifier for speakers or a subwoofer without replacing the original radio.
Gain Controller and Signal-Sense Remote
A separate gain controller lets the installer set the overall output level to match the amplifier input sensitivity. The built-in 12 V 500 mA remote wire activates automatically through signal sensing, removing the need for a dedicated turn-on lead from the head unit.
55 Watts Per Channel Input Capacity
The converter accepts up to 55 watts per channel from the factory system, providing clean pre-amp signals for a single added amplifier. Installers planning multiple amplifiers should note that a separate SPDT relay is recommended, and vehicles outside the listed Chrysler and Dodge applications are not supported.
Highlights
- Two-channel low-level output adds an amplifier
- Gain Controller adjusts overall output level
- Signal-sense remote wire activates at 12 V 500 mA
- 55-watts per channel drives speakers or subwoofer
- Fits Chrysler 300 2011-2014 and Dodge Charger Journey 2011-2020
Specifications
| Type | Line Output Converter |
|---|
Questions about this item
Will the Gain Controller need recalibration or replacement over time?
The Gain Controller is a passive level adjuster with no moving parts or firmware, so it does not require scheduled recalibration or replacement.
At what output level does the 55-watt per channel rating become a limiting factor?
The converter delivers up to 55 watts per channel; sustained demand above that level will clip the signal and trigger the amplifier's protection circuit.
How much heat does the 12 V 500 mA remote wire generate during all-day operation?
The remote wire draws only 500 mA at 12 V, producing negligible heat that does not affect the converter or surrounding wiring.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



