We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular car audio line output converter with side-mounted adjustment knobs and molded cable channels

Axxess Technologies

Axxess AXLOC-80SP 2-Channel Line Output Converter 80W

SKU CH-QDGK-VWS5Y

Converts speaker-level signals to RCA for aftermarket amplifiers, compatible with OEM radios featuring short-circuit protection and offering separate level controls per channel

  • TypeLine Output Adapters
  • Channels2-channel
  • Works with OEM radios featuring short-circuit protection
  • Two-channel input accepts factory speaker-level signals
  • Handles up to 80 watts maximum input power
  • Independent level adjustment for each channel
  • Compact moulded housing with zip-tie channels for secure mounting

Universal Two-Channel Converter

The Axxess AXLOC-80SP is a two-channel line output converter built for vehicles with factory radios that include short-circuit protection. It accepts speaker-level signals up to 80 watts and converts them to a clean pre-amp output for an aftermarket amplifier. Separate level controls on each channel let the installer balance the signal without extra tools. The compact moulded housing includes channels that grip zip ties for a secure mount.

Installers Adding an Amplifier to Protected OEM

This unit suits installers who need to add an aftermarket amplifier to a factory head unit that mutes its outputs when it detects a low-impedance load. The converter presents the correct load so the radio stays active and the amplifier receives a usable signal. Builders whose factory radio lacks short-circuit protection or who require more than two input channels should look at a different interface.

80-Watt Maximum Input per Channel

The 80-watt rating defines the highest speaker-level power the converter can accept without distortion or damage. If the factory amplifier delivers more power than this, the converter will not be suitable and a higher-rated model must be chosen.

Highlights

  • Works with OEM radios featuring short-circuit protection
  • Two-channel input accepts factory speaker-level signals
  • Handles up to 80 watts maximum input power
  • Independent level adjustment for each channel
  • Compact moulded housing with zip-tie channels for secure mounting

Specifications

BrandAxxess
TypeLine Output Adapters
Channels2-channel

Questions about this item

What amplifier power rating is required to stay within the converter's 80-watt maximum input?

The converter accepts up to 80 watts per channel from the factory speaker outputs, so your aftermarket amplifier must not exceed that level on the connected channels.

Will this converter work with an older factory head unit that lacks short-circuit protection?

It is designed specifically for OEM radios that include short-circuit protection; units without that protection may not trigger the converter correctly.

How can I confirm each channel is delivering signal after installation?

Use the separate level controls to adjust each channel, then verify audio output at the amplifier's RCA outputs with a test tone or music.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.