Axiom
Axiom UF-MM-10G-AX SFP+ transceiver network ethernet cable
A 10 Gigabit Ethernet SFP+ transceiver pair for multi-mode fibre at 850 nm up to 984 ft
- TypeConsumer Electronics
- 10 Gigabit Ethernet speed for high-bandwidth networks
- 850 nm multi-mode fibre reaches 984 ft
- LC duplex connector fits standard SFP+ ports
- MSA compliant design works with Ubiquiti UF-MM-10G
- RoHS certified and backed by lifetime warranty
Axiom 10G SFP+ Dual Pack
Two Axiom UF-MM-10G-AX SFP+ transceiver modules arrive ready for 10 Gigabit Ethernet links over multi-mode fibre. Each unit uses an LC connector and operates at 850 nm wavelength. The pair suits data centres or campus networks that need matched optics for uplink aggregation. MSA compliance allows mixing with other compliant gear.
Simple Hot-Plug Install
Insert each transceiver into an SFP+ cage until the latch clicks, then seat the LC duplex patch cords. Dust caps protect the optical interfaces until connection. The most common issue is crossing the Tx and Rx fibres, which prevents link-up; swapping the pair at one end restores signal. Dirty end-faces also cause errors, so clean with a fibre scope before mating.
984 ft Multi-Mode Reach
The 10GBase-SR optics support up to 984 ft on OM3 or OM4 multi-mode fibre. This distance ceiling decides whether the module fits a given inter-rack or building run. Longer spans require different optics not included in this pack.
Highlights
- 10 Gigabit Ethernet speed for high-bandwidth networks
- 850 nm multi-mode fibre reaches 984 ft
- LC duplex connector fits standard SFP+ ports
- MSA compliant design works with Ubiquiti UF-MM-10G
- RoHS certified and backed by lifetime warranty
Specifications
| Brand | Axiom |
|---|---|
| Type | Consumer Electronics |
| Shipping weight | 0.91 kg |
| Package size | 203 × 51 × 51 mm |
Questions about this item
How do I confirm the 10GBase-SR link is up after installation?
Check the switch port LEDs for a solid link light and verify the interface shows 10 Gigabit Ethernet speed with no errors in the management console.
What comes in the pack and what must be purchased separately?
The pack contains two SFP+ transceiver modules with LC connectors; multi-mode patch cables with LC terminations are required separately.
Which version should I choose for a run of 984 ft over multi-mode fiber?
This 850 nm 10GBase-SR module is specified for up to 984 ft on multi-mode fiber and matches that distance requirement.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



